Microstructure formation of litizn ferrite ceramics during radiation-thermal sintering

Research output: Contribution to journalArticle

Abstract

The effect of intensification of the compaction rate of ferrite compacts under irradiation conditions with a high-power electron beam both in the heating regime and in the isothermal stage of sintering was established. The compaction mechanisms of the compacts are different at each of these stages. The intensification of compaction at the non-isothermal stage in radiation-thermal conditions is due to processes involving the liquid phase. The role of bismuth oxide in the compaction of the material at the isothermal stage of sintering is unessential, but its influence is significant in recrystallization processes. Under of Ivensen’s phenomenology, compaction curves are explained by the deceleration of annealing of structural defects responsible for the fluidity of the material. Dislocations are the most probable type of defects, satisfying the detected regularities.

Original languageEnglish
Pages (from-to)265-275
Number of pages11
JournalMaterials Science Forum
Volume970
DOIs
Publication statusPublished - 2019

Keywords

  • Electron beam
  • Microstructure
  • Radiation-thermal heating
  • Substituted lithium ferrites

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Microstructure formation of litizn ferrite ceramics during radiation-thermal sintering'. Together they form a unique fingerprint.

  • Cite this