Microstructure and properties of vacuum electron beam facing CuCr25 contact material

Vasil G. Durakov, S. F. Gnyusov, B. V. Dampilon, S. Z. Dehonova, B. I. Ubiennykh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

The copper chromium composite coatings produced by the electron beam facing in the vacuum on the cooper substrate have been investigated. The effect of the electron beam facing on the structure and the properties of the coatings has been determined. The chromium based solid solution containing 2, 5-4, 5% at. Cu and the copper based solid solution containing 3-5% at. Cr form in process of the electron beam facing by means of the rapid crystallization of the melting zone. As a result of the electron beam facing, two of the dimensiontype is appears in the surfaced coat (the bimodal distribution): the dendritic chromium is formed during solidification (the primary chromium particle), and the chromium precipitating at the boundaries and the within of the grain (the secondary chromium particle) as a result of age hardening of the solid solution of the copper based material. The commercial arc blowout vacuum chambers were fabricated using Cu75Cr25 contacts faced by electron beam and then passed the tests at Inc 'Minusinsk vacuum switch factory - Elektrocomplex', Minusinsk, RF. The test data exhibit that the electron-beam technology of making the contacts of the vacuum chamber proves to be efficient in improving breaking capacity of vacuum interrupters without sacrificing their other service characteristics.

Original languageEnglish
Title of host publicationProceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV
Pages525-528
Number of pages4
DOIs
Publication statusPublished - 2012
Event25th International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV 2012 - Tomsk, Russian Federation
Duration: 2 Sep 20127 Sep 2012

Other

Other25th International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV 2012
CountryRussian Federation
CityTomsk
Period2.9.127.9.12

Fingerprint

Electron beams
Chromium
Vacuum
Microstructure
Solid solutions
Copper
Zone melting
Age hardening
Composite coatings
Solidification
Industrial plants
Crystallization
Switches
Coatings
Substrates

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Software

Cite this

Durakov, V. G., Gnyusov, S. F., Dampilon, B. V., Dehonova, S. Z., & Ubiennykh, B. I. (2012). Microstructure and properties of vacuum electron beam facing CuCr25 contact material. In Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV (pp. 525-528). [6412571] https://doi.org/10.1109/DEIV.2012.6412571

Microstructure and properties of vacuum electron beam facing CuCr25 contact material. / Durakov, Vasil G.; Gnyusov, S. F.; Dampilon, B. V.; Dehonova, S. Z.; Ubiennykh, B. I.

Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV. 2012. p. 525-528 6412571.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Durakov, VG, Gnyusov, SF, Dampilon, BV, Dehonova, SZ & Ubiennykh, BI 2012, Microstructure and properties of vacuum electron beam facing CuCr25 contact material. in Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV., 6412571, pp. 525-528, 25th International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV 2012, Tomsk, Russian Federation, 2.9.12. https://doi.org/10.1109/DEIV.2012.6412571
Durakov VG, Gnyusov SF, Dampilon BV, Dehonova SZ, Ubiennykh BI. Microstructure and properties of vacuum electron beam facing CuCr25 contact material. In Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV. 2012. p. 525-528. 6412571 https://doi.org/10.1109/DEIV.2012.6412571
Durakov, Vasil G. ; Gnyusov, S. F. ; Dampilon, B. V. ; Dehonova, S. Z. ; Ubiennykh, B. I. / Microstructure and properties of vacuum electron beam facing CuCr25 contact material. Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV. 2012. pp. 525-528
@inproceedings{56c86b9006754792819d648f853ec065,
title = "Microstructure and properties of vacuum electron beam facing CuCr25 contact material",
abstract = "The copper chromium composite coatings produced by the electron beam facing in the vacuum on the cooper substrate have been investigated. The effect of the electron beam facing on the structure and the properties of the coatings has been determined. The chromium based solid solution containing 2, 5-4, 5{\%} at. Cu and the copper based solid solution containing 3-5{\%} at. Cr form in process of the electron beam facing by means of the rapid crystallization of the melting zone. As a result of the electron beam facing, two of the dimensiontype is appears in the surfaced coat (the bimodal distribution): the dendritic chromium is formed during solidification (the primary chromium particle), and the chromium precipitating at the boundaries and the within of the grain (the secondary chromium particle) as a result of age hardening of the solid solution of the copper based material. The commercial arc blowout vacuum chambers were fabricated using Cu75Cr25 contacts faced by electron beam and then passed the tests at Inc 'Minusinsk vacuum switch factory - Elektrocomplex', Minusinsk, RF. The test data exhibit that the electron-beam technology of making the contacts of the vacuum chamber proves to be efficient in improving breaking capacity of vacuum interrupters without sacrificing their other service characteristics.",
author = "Durakov, {Vasil G.} and Gnyusov, {S. F.} and Dampilon, {B. V.} and Dehonova, {S. Z.} and Ubiennykh, {B. I.}",
year = "2012",
doi = "10.1109/DEIV.2012.6412571",
language = "English",
isbn = "9781467312660",
pages = "525--528",
booktitle = "Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV",

}

TY - GEN

T1 - Microstructure and properties of vacuum electron beam facing CuCr25 contact material

AU - Durakov, Vasil G.

AU - Gnyusov, S. F.

AU - Dampilon, B. V.

AU - Dehonova, S. Z.

AU - Ubiennykh, B. I.

PY - 2012

Y1 - 2012

N2 - The copper chromium composite coatings produced by the electron beam facing in the vacuum on the cooper substrate have been investigated. The effect of the electron beam facing on the structure and the properties of the coatings has been determined. The chromium based solid solution containing 2, 5-4, 5% at. Cu and the copper based solid solution containing 3-5% at. Cr form in process of the electron beam facing by means of the rapid crystallization of the melting zone. As a result of the electron beam facing, two of the dimensiontype is appears in the surfaced coat (the bimodal distribution): the dendritic chromium is formed during solidification (the primary chromium particle), and the chromium precipitating at the boundaries and the within of the grain (the secondary chromium particle) as a result of age hardening of the solid solution of the copper based material. The commercial arc blowout vacuum chambers were fabricated using Cu75Cr25 contacts faced by electron beam and then passed the tests at Inc 'Minusinsk vacuum switch factory - Elektrocomplex', Minusinsk, RF. The test data exhibit that the electron-beam technology of making the contacts of the vacuum chamber proves to be efficient in improving breaking capacity of vacuum interrupters without sacrificing their other service characteristics.

AB - The copper chromium composite coatings produced by the electron beam facing in the vacuum on the cooper substrate have been investigated. The effect of the electron beam facing on the structure and the properties of the coatings has been determined. The chromium based solid solution containing 2, 5-4, 5% at. Cu and the copper based solid solution containing 3-5% at. Cr form in process of the electron beam facing by means of the rapid crystallization of the melting zone. As a result of the electron beam facing, two of the dimensiontype is appears in the surfaced coat (the bimodal distribution): the dendritic chromium is formed during solidification (the primary chromium particle), and the chromium precipitating at the boundaries and the within of the grain (the secondary chromium particle) as a result of age hardening of the solid solution of the copper based material. The commercial arc blowout vacuum chambers were fabricated using Cu75Cr25 contacts faced by electron beam and then passed the tests at Inc 'Minusinsk vacuum switch factory - Elektrocomplex', Minusinsk, RF. The test data exhibit that the electron-beam technology of making the contacts of the vacuum chamber proves to be efficient in improving breaking capacity of vacuum interrupters without sacrificing their other service characteristics.

UR - http://www.scopus.com/inward/record.url?scp=84873968749&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84873968749&partnerID=8YFLogxK

U2 - 10.1109/DEIV.2012.6412571

DO - 10.1109/DEIV.2012.6412571

M3 - Conference contribution

SN - 9781467312660

SP - 525

EP - 528

BT - Proceedings - International Symposium on Discharges and Electrical Insulation in Vacuum, ISDEIV

ER -