Method of manufacturing of composite for 3D printing and the electrophysical properties of the obtained material

K. Dorozhkin, A. Tkachev, G. Kuleshov, A. Badin, E. Galunin, T. Shematilo, V. Suslyaev

Research output: Contribution to journalConference articlepeer-review

Abstract

The present paper presents the technology for the manufacture of filaments based on ABS plastic and Taunit-M nanomaterial for use in 3D printing. A test sample was printed from this filament on a 3D printer using the layered overlap method at 15% Taunit-M content. The transmittance spectra for the printed sample were obtained using a Mach-Zander interferometer in the frequency range 120-260 GHz. The complex dielectric constant of the studied composite was calculated.

Original languageEnglish
Article number012006
JournalIOP Conference Series: Materials Science and Engineering
Volume693
Issue number1
DOIs
Publication statusPublished - 28 Nov 2019
Externally publishedYes
Event3rd International Scientific-Practical Conference on Graphene and Related Structures: Synthesis, Production, and Application, GRS-2019 - Tambov, Russian Federation
Duration: 13 Nov 201915 Nov 2019

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Method of manufacturing of composite for 3D printing and the electrophysical properties of the obtained material'. Together they form a unique fingerprint.

Cite this