Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system

Yu D. Korolev, O. B. Frants, V. G. Geyman, N. V. Landl, I. A. Shemyakin, K. Frank, R. Bischoff, J. Pankert, K. Bergmann

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)

    Abstract

    A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.

    Original languageEnglish
    Title of host publicationConference Record of the International Power Modulator Symposium and High Voltage Workshop
    Pages588-591
    Number of pages4
    Publication statusPublished - 2004
    Event2004 IEEE International Power Modulator Conference: 26th International Power Modulator Symposium and 2004 High Voltage Workshop - San Francisco, CA, United States
    Duration: 23 May 200426 May 2004

    Other

    Other2004 IEEE International Power Modulator Conference: 26th International Power Modulator Symposium and 2004 High Voltage Workshop
    CountryUnited States
    CitySan Francisco, CA
    Period23.5.0426.5.04

    Fingerprint

    Cathodes
    Switches
    Electrodes
    Networks (circuits)

    ASJC Scopus subject areas

    • Engineering(all)

    Cite this

    Korolev, Y. D., Frants, O. B., Geyman, V. G., Landl, N. V., Shemyakin, I. A., Frank, K., ... Bergmann, K. (2004). Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. In Conference Record of the International Power Modulator Symposium and High Voltage Workshop (pp. 588-591)

    Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. / Korolev, Yu D.; Frants, O. B.; Geyman, V. G.; Landl, N. V.; Shemyakin, I. A.; Frank, K.; Bischoff, R.; Pankert, J.; Bergmann, K.

    Conference Record of the International Power Modulator Symposium and High Voltage Workshop. 2004. p. 588-591.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    Korolev, YD, Frants, OB, Geyman, VG, Landl, NV, Shemyakin, IA, Frank, K, Bischoff, R, Pankert, J & Bergmann, K 2004, Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. in Conference Record of the International Power Modulator Symposium and High Voltage Workshop. pp. 588-591, 2004 IEEE International Power Modulator Conference: 26th International Power Modulator Symposium and 2004 High Voltage Workshop, San Francisco, CA, United States, 23.5.04.
    Korolev YD, Frants OB, Geyman VG, Landl NV, Shemyakin IA, Frank K et al. Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. In Conference Record of the International Power Modulator Symposium and High Voltage Workshop. 2004. p. 588-591
    Korolev, Yu D. ; Frants, O. B. ; Geyman, V. G. ; Landl, N. V. ; Shemyakin, I. A. ; Frank, K. ; Bischoff, R. ; Pankert, J. ; Bergmann, K. / Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system. Conference Record of the International Power Modulator Symposium and High Voltage Workshop. 2004. pp. 588-591
    @inproceedings{18182219b9b5447e8c352a1d9e5b1f34,
    title = "Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system",
    abstract = "A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.",
    author = "Korolev, {Yu D.} and Frants, {O. B.} and Geyman, {V. G.} and Landl, {N. V.} and Shemyakin, {I. A.} and K. Frank and R. Bischoff and J. Pankert and K. Bergmann",
    year = "2004",
    language = "English",
    pages = "588--591",
    booktitle = "Conference Record of the International Power Modulator Symposium and High Voltage Workshop",

    }

    TY - GEN

    T1 - Method for externally triggering a pseudospark switch for the case where the trigger unit IS located on the potential side of AN electrode system

    AU - Korolev, Yu D.

    AU - Frants, O. B.

    AU - Geyman, V. G.

    AU - Landl, N. V.

    AU - Shemyakin, I. A.

    AU - Frank, K.

    AU - Bischoff, R.

    AU - Pankert, J.

    AU - Bergmann, K.

    PY - 2004

    Y1 - 2004

    N2 - A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.

    AB - A great variety of trigger systems for pseudospark switches have been described in current publications. In most cases the trigger units are mounted at the grounded cathode. However, in some cases, a specific requirement for triggering is required, namely, that the trigger unit be located at the cathode. Direct application of previous experience, as applied to these cases, leads to a rather intricate design for both the mechanical parts of the trigger unit and the electric circuit. This paper proposes a simple triggering method for such conditions.

    UR - http://www.scopus.com/inward/record.url?scp=22244431894&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=22244431894&partnerID=8YFLogxK

    M3 - Conference contribution

    SP - 588

    EP - 591

    BT - Conference Record of the International Power Modulator Symposium and High Voltage Workshop

    ER -