Metals and oxide-silicate stuffs hydrostatic forming

E. B. Glukhov, A. A. Kondratyuk, V. P. Nesterenko

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Much attention is given to manufacturing materials with heightened physical and mechanical properties. When forming powder compositions the method of hydrostatic pressing (HP) is used. This method allows receiving isotropic articles with a practically unlimited ratio of length and sizes of cross section. On the installation of UVD-7 the model researches of pressing characteristics of copper powders produced according to standard 4960-75 were conducted. The results of influence of bulk weight, dispersion, configuration and methods of powders obtained on porosity of articles were obtained.

Original languageEnglish
Title of host publicationProceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages145-148
Number of pages4
ISBN (Print)0780357892, 9780780357891
DOIs
Publication statusPublished - 2000
Event6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000 - Tomsk, Russian Federation
Duration: 28 Feb 20003 Mar 2000

Other

Other6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000
CountryRussian Federation
CityTomsk
Period28.2.003.3.00

Fingerprint

Silicates
Hydrostatic pressing
Copper powder
Powders
Oxides
Metals
Physical properties
Porosity
Mechanical properties
Chemical analysis

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Glukhov, E. B., Kondratyuk, A. A., & Nesterenko, V. P. (2000). Metals and oxide-silicate stuffs hydrostatic forming. In Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000 (pp. 145-148). [896091] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SPCMTT.2000.896091

Metals and oxide-silicate stuffs hydrostatic forming. / Glukhov, E. B.; Kondratyuk, A. A.; Nesterenko, V. P.

Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000. Institute of Electrical and Electronics Engineers Inc., 2000. p. 145-148 896091.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Glukhov, EB, Kondratyuk, AA & Nesterenko, VP 2000, Metals and oxide-silicate stuffs hydrostatic forming. in Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000., 896091, Institute of Electrical and Electronics Engineers Inc., pp. 145-148, 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000, Tomsk, Russian Federation, 28.2.00. https://doi.org/10.1109/SPCMTT.2000.896091
Glukhov EB, Kondratyuk AA, Nesterenko VP. Metals and oxide-silicate stuffs hydrostatic forming. In Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000. Institute of Electrical and Electronics Engineers Inc. 2000. p. 145-148. 896091 https://doi.org/10.1109/SPCMTT.2000.896091
Glukhov, E. B. ; Kondratyuk, A. A. ; Nesterenko, V. P. / Metals and oxide-silicate stuffs hydrostatic forming. Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000. Institute of Electrical and Electronics Engineers Inc., 2000. pp. 145-148
@inproceedings{aa7eea2e04a743b897c4ae40783d6137,
title = "Metals and oxide-silicate stuffs hydrostatic forming",
abstract = "Much attention is given to manufacturing materials with heightened physical and mechanical properties. When forming powder compositions the method of hydrostatic pressing (HP) is used. This method allows receiving isotropic articles with a practically unlimited ratio of length and sizes of cross section. On the installation of UVD-7 the model researches of pressing characteristics of copper powders produced according to standard 4960-75 were conducted. The results of influence of bulk weight, dispersion, configuration and methods of powders obtained on porosity of articles were obtained.",
author = "Glukhov, {E. B.} and Kondratyuk, {A. A.} and Nesterenko, {V. P.}",
year = "2000",
doi = "10.1109/SPCMTT.2000.896091",
language = "English",
isbn = "0780357892",
pages = "145--148",
booktitle = "Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Metals and oxide-silicate stuffs hydrostatic forming

AU - Glukhov, E. B.

AU - Kondratyuk, A. A.

AU - Nesterenko, V. P.

PY - 2000

Y1 - 2000

N2 - Much attention is given to manufacturing materials with heightened physical and mechanical properties. When forming powder compositions the method of hydrostatic pressing (HP) is used. This method allows receiving isotropic articles with a practically unlimited ratio of length and sizes of cross section. On the installation of UVD-7 the model researches of pressing characteristics of copper powders produced according to standard 4960-75 were conducted. The results of influence of bulk weight, dispersion, configuration and methods of powders obtained on porosity of articles were obtained.

AB - Much attention is given to manufacturing materials with heightened physical and mechanical properties. When forming powder compositions the method of hydrostatic pressing (HP) is used. This method allows receiving isotropic articles with a practically unlimited ratio of length and sizes of cross section. On the installation of UVD-7 the model researches of pressing characteristics of copper powders produced according to standard 4960-75 were conducted. The results of influence of bulk weight, dispersion, configuration and methods of powders obtained on porosity of articles were obtained.

UR - http://www.scopus.com/inward/record.url?scp=84952900933&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84952900933&partnerID=8YFLogxK

U2 - 10.1109/SPCMTT.2000.896091

DO - 10.1109/SPCMTT.2000.896091

M3 - Conference contribution

AN - SCOPUS:84952900933

SN - 0780357892

SN - 9780780357891

SP - 145

EP - 148

BT - Proceedings of the 6th International Scientific and Practical Conference of Students, Post-Graduates and Young Scientists: Modern Techniques and Technology, MTT 2000

PB - Institute of Electrical and Electronics Engineers Inc.

ER -