Metal Vapor Active Element Design

    Research output: Contribution to journalArticlepeer-review


    Abstract: A novel metal vapor active element is constructed. The functions of metal vaporization and metal vapor excitation are divided between two different sources, which is a feature of the new element. Metal vapors are formed by induction heating of a dispenser located outside the active zone. The excitation is carried out by the commutation of a high-voltage pump pulse. The efficiency of the design has been tested in the excitation of copper atoms. Under conditions of independent heating of the dispenser, stable lasing was obtained at 510.6 and 578.2 nm lines at a pumping pulse repetition rate of 15 kHz.

    Original languageEnglish
    Pages (from-to)706-709
    Number of pages4
    JournalAtmospheric and Oceanic Optics
    Issue number6
    Publication statusPublished - 1 Nov 2019


    • active element design
    • inductive heating
    • light sources
    • metal vapor lasers

    ASJC Scopus subject areas

    • Oceanography
    • Atomic and Molecular Physics, and Optics
    • Earth-Surface Processes
    • Atmospheric Science

    Fingerprint Dive into the research topics of 'Metal Vapor Active Element Design'. Together they form a unique fingerprint.

    Cite this