Metal-polymer-ceramic constrained layer damping system

L. V. Bochkareva, M. V. Kireitseu, S. Panin

Research output: Contribution to conferencePaper

Abstract

The focus in this paper is directed toward to the investigation into hybrid metal-polymer-ceramic damping coatings. Sandwiched coating's layers have been manufactured by advanced technology based on combination of thermal flame spraying of foamy aluminum or its alloy and viscous-elastic polymeric (polyamide) layers, including 1-4 wt.% reinforcing additives of carbon nanotubes. Technological aspects of manufacturing are being discussed in terms of vibration damping properties and strength of the materials. The CNT-reinforced material is formed as a constrained-layer damping coating system (CLD) showing the greatest range over which damping have excellent energy absorbing/damping properties over bulk materials. Modal loss factors obtained at 60-80% partial-coverage of tested specimens was higher than that of maximum damping obtained in the case of 100% specimen coverage. FEM-based computer modeling was used to predict the damping of multilayer materials by a strain energy method. An effective damping design involves selecting a proper combination of coverage area, relative thickness and stiffness values of the CLD configuration. The coating could be recommended for applications in sliding and rolling bearing units, low-speed and light-weight gearing drives and other machine parts.

Original languageEnglish
Pages991-1001
Number of pages11
Publication statusPublished - 1 Jan 2006
EventInternational Conference on Noise and Vibration Engineering 2006, ISMA 2006 - Heverlee, Belgium
Duration: 18 Sep 200620 Sep 2006

Other

OtherInternational Conference on Noise and Vibration Engineering 2006, ISMA 2006
CountryBelgium
CityHeverlee
Period18.9.0620.9.06

    Fingerprint

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Mechanical Engineering
  • Materials Science(all)
  • Acoustics and Ultrasonics
  • Condensed Matter Physics

Cite this

Bochkareva, L. V., Kireitseu, M. V., & Panin, S. (2006). Metal-polymer-ceramic constrained layer damping system. 991-1001. Paper presented at International Conference on Noise and Vibration Engineering 2006, ISMA 2006, Heverlee, Belgium.