Melting of corrosion-resisting steels using air in bath agitation at the end of oxygen blowing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

A number of metallurgical plants employ ladle stirring with argon at the end of oxygen blowing during the melting process of corrosion-resisting steels [1, 2]. At the same time, the scarcity and relatively high cost of argon, its low pressure in a shop air pipeline restrain most plants from using argon for corrosion-resisting steel production. Compressed air was used instead of argon to intensify the process of decarbonizing when chromium-nickel stainless steels were made with a 40-ton electric arc furnace at the Kuznetsk Metallurgical Plant.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
PublisherInstitute of Physics Publishing
Volume66
Edition1
DOIs
Publication statusPublished - 2014
Event20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014 - Tomsk, Russian Federation
Duration: 14 Apr 201418 Apr 2014

Other

Other20th International Conference for Students and Young Scientists: Modern Techniques and Technologies, MTT 2014
CountryRussian Federation
CityTomsk
Period14.4.1418.4.14

    Fingerprint

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this

Gizatulin, R. A., Valuev, D. V., Valueva, A. V., & Yedesheva, C. V. (2014). Melting of corrosion-resisting steels using air in bath agitation at the end of oxygen blowing. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 66). [012012] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/66/1/012012