Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology

A. V. Chumaevskii, E. S. Khoroshko, K. N. Kalashnikov, A. V. Filippov, T. A. Kalashnikova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.

Original languageEnglish
Title of host publicationMechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018
Subtitle of host publicationProceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures
EditorsSunder Ramasubbu, Eduard S. Gorkunov, Victor E. Panin
PublisherAmerican Institute of Physics Inc.
ISBN (Electronic)9780735417816
DOIs
Publication statusPublished - 19 Dec 2018
Event12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018 - Ekaterinburg, Russian Federation
Duration: 21 May 201825 May 2018

Publication series

NameAIP Conference Proceedings
Volume2053
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Conference

Conference12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018
CountryRussian Federation
CityEkaterinburg
Period21.5.1825.5.18

Fingerprint

stainless steels
mechanical properties
electron beams
steels
metals
printing
casts
filaments
manufacturing
melting
wire
vacuum

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Chumaevskii, A. V., Khoroshko, E. S., Kalashnikov, K. N., Filippov, A. V., & Kalashnikova, T. A. (2018). Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. In S. Ramasubbu, E. S. Gorkunov, & V. E. Panin (Eds.), Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures [040015] (AIP Conference Proceedings; Vol. 2053). American Institute of Physics Inc.. https://doi.org/10.1063/1.5084453

Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. / Chumaevskii, A. V.; Khoroshko, E. S.; Kalashnikov, K. N.; Filippov, A. V.; Kalashnikova, T. A.

Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. ed. / Sunder Ramasubbu; Eduard S. Gorkunov; Victor E. Panin. American Institute of Physics Inc., 2018. 040015 (AIP Conference Proceedings; Vol. 2053).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chumaevskii, AV, Khoroshko, ES, Kalashnikov, KN, Filippov, AV & Kalashnikova, TA 2018, Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. in S Ramasubbu, ES Gorkunov & VE Panin (eds), Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures., 040015, AIP Conference Proceedings, vol. 2053, American Institute of Physics Inc., 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018, Ekaterinburg, Russian Federation, 21.5.18. https://doi.org/10.1063/1.5084453
Chumaevskii AV, Khoroshko ES, Kalashnikov KN, Filippov AV, Kalashnikova TA. Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. In Ramasubbu S, Gorkunov ES, Panin VE, editors, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc. 2018. 040015. (AIP Conference Proceedings). https://doi.org/10.1063/1.5084453
Chumaevskii, A. V. ; Khoroshko, E. S. ; Kalashnikov, K. N. ; Filippov, A. V. ; Kalashnikova, T. A. / Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology. Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. editor / Sunder Ramasubbu ; Eduard S. Gorkunov ; Victor E. Panin. American Institute of Physics Inc., 2018. (AIP Conference Proceedings).
@inproceedings{5749ee364a0341d889458a7dd40d0446,
title = "Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology",
abstract = "In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.",
author = "Chumaevskii, {A. V.} and Khoroshko, {E. S.} and Kalashnikov, {K. N.} and Filippov, {A. V.} and Kalashnikova, {T. A.}",
year = "2018",
month = "12",
day = "19",
doi = "10.1063/1.5084453",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Sunder Ramasubbu and Gorkunov, {Eduard S.} and Panin, {Victor E.}",
booktitle = "Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018",

}

TY - GEN

T1 - Mechanical properties of stainless steel 321, obtained by the electron-beam additive technology

AU - Chumaevskii, A. V.

AU - Khoroshko, E. S.

AU - Kalashnikov, K. N.

AU - Filippov, A. V.

AU - Kalashnikova, T. A.

PY - 2018/12/19

Y1 - 2018/12/19

N2 - In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.

AB - In this paper, the mechanical properties of samples of austenitic steel 321 obtained by the additive manufacturing method are studied. 3D printing of samples is carried out according to the technology based on the use of stainless steel wire filaments, applied to the surface of the substrate by electron beam melting in vacuum. Mechanical tests of the samples show that they correspond to those of as-cast steel 321 in terms of their strength characteristics. The characteristic features of the fracture of the samples cut from the base metal of the substrate, the zone of transition from the substrate to the sample, and the sample metal show that, when the material of the samples is fractured, finer pit structures are formed, and this indicates a more viscous nature of the fracture as compared to the base metal.

UR - http://www.scopus.com/inward/record.url?scp=85059428807&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85059428807&partnerID=8YFLogxK

U2 - 10.1063/1.5084453

DO - 10.1063/1.5084453

M3 - Conference contribution

T3 - AIP Conference Proceedings

BT - Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018

A2 - Ramasubbu, Sunder

A2 - Gorkunov, Eduard S.

A2 - Panin, Victor E.

PB - American Institute of Physics Inc.

ER -