Measurement of the current transfer ratio for current shunts

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

Current shunts are widely used in metrological practice. The shunt is required to determine the value of its resistance on DC and AC currents to determine the transfer ratio error in the wide frequency band in process calibration. The paper describes a procedure for measuring the complex impedance of transfer ratio of current shunts in the frequency band using the lock-in amplifier with the differential input. The experimental results of the proposed procedure are described.

Original languageEnglish
Title of host publicationXXI IMEKO World Congress "Measurement in Research and Industry"
PublisherIMEKO-International Measurement Federation Secretariat
Publication statusPublished - 2015
Event21st IMEKO World Congress on Measurement in Research and Industry - Prague, Czech Republic
Duration: 30 Aug 20154 Sep 2015

Conference

Conference21st IMEKO World Congress on Measurement in Research and Industry
CountryCzech Republic
CityPrague
Period30.8.154.9.15

    Fingerprint

Keywords

  • Calibration
  • Complex impedance
  • Current shunt
  • Lock-in amplifier
  • Transfer ratio

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Baranov, P. F., Tsimbalist, E. I., Borikov, V. N., & Soltanova, D. G. (2015). Measurement of the current transfer ratio for current shunts. In XXI IMEKO World Congress "Measurement in Research and Industry" IMEKO-International Measurement Federation Secretariat.