Machining of titanium alloys with wave milling cutters

G. I. Korovin, S. I. Petrushin, R. H. Gubaidulina

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

In the paper it is pointed out that machining of titanium alloys is the most difficult problem in metal cutting. The leading world companies are dealing with this problem, as titanium alloys are the basis of the aerospace industry. In the paper high-speed cutters with wavelike teeth edges used for titanium alloys processing are investigated. Every subsequent tooth is displaced at half-space distance. This reduces power load on the hardening of the machined surface. On the basis of power and wear-resistance studies, the advantage of wavy milling cutters in comparison with standard ones is established; it is proved that wavy cutters have a lower specific power load, greater wear resistance and less surface hardening.

Original languageEnglish
Title of host publicationMaterials and Processing Technology II
EditorsDmitry A. Chinakhov, Dmitry A. Chinakhov
PublisherTrans Tech Publications Ltd
Pages79-85
Number of pages7
ISBN (Print)9783035713978
DOIs
Publication statusPublished - 1 Jan 2018

Publication series

NameMaterials Science Forum
Volume927 MSF
ISSN (Print)0255-5476

Fingerprint

Milling cutters
cutters
titanium alloys
Titanium alloys
machining
Machining
teeth
wear resistance
hardening
Wear resistance
Hardening
metal cutting
aerospace industry
Metal cutting
Aerospace industry
half spaces
Loads (forces)
high speed
Processing
Industry

Keywords

  • Chip formation
  • Cutting tools
  • Machining of titanium alloys
  • Milling
  • Wavy milling cutter

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Korovin, G. I., Petrushin, S. I., & Gubaidulina, R. H. (2018). Machining of titanium alloys with wave milling cutters. In D. A. Chinakhov, & D. A. Chinakhov (Eds.), Materials and Processing Technology II (pp. 79-85). (Materials Science Forum; Vol. 927 MSF). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.927.79

Machining of titanium alloys with wave milling cutters. / Korovin, G. I.; Petrushin, S. I.; Gubaidulina, R. H.

Materials and Processing Technology II. ed. / Dmitry A. Chinakhov; Dmitry A. Chinakhov. Trans Tech Publications Ltd, 2018. p. 79-85 (Materials Science Forum; Vol. 927 MSF).

Research output: Chapter in Book/Report/Conference proceedingChapter

Korovin, GI, Petrushin, SI & Gubaidulina, RH 2018, Machining of titanium alloys with wave milling cutters. in DA Chinakhov & DA Chinakhov (eds), Materials and Processing Technology II. Materials Science Forum, vol. 927 MSF, Trans Tech Publications Ltd, pp. 79-85. https://doi.org/10.4028/www.scientific.net/MSF.927.79
Korovin GI, Petrushin SI, Gubaidulina RH. Machining of titanium alloys with wave milling cutters. In Chinakhov DA, Chinakhov DA, editors, Materials and Processing Technology II. Trans Tech Publications Ltd. 2018. p. 79-85. (Materials Science Forum). https://doi.org/10.4028/www.scientific.net/MSF.927.79
Korovin, G. I. ; Petrushin, S. I. ; Gubaidulina, R. H. / Machining of titanium alloys with wave milling cutters. Materials and Processing Technology II. editor / Dmitry A. Chinakhov ; Dmitry A. Chinakhov. Trans Tech Publications Ltd, 2018. pp. 79-85 (Materials Science Forum).
@inbook{1dae8b798f4148439f00c141732a63c7,
title = "Machining of titanium alloys with wave milling cutters",
abstract = "In the paper it is pointed out that machining of titanium alloys is the most difficult problem in metal cutting. The leading world companies are dealing with this problem, as titanium alloys are the basis of the aerospace industry. In the paper high-speed cutters with wavelike teeth edges used for titanium alloys processing are investigated. Every subsequent tooth is displaced at half-space distance. This reduces power load on the hardening of the machined surface. On the basis of power and wear-resistance studies, the advantage of wavy milling cutters in comparison with standard ones is established; it is proved that wavy cutters have a lower specific power load, greater wear resistance and less surface hardening.",
keywords = "Chip formation, Cutting tools, Machining of titanium alloys, Milling, Wavy milling cutter",
author = "Korovin, {G. I.} and Petrushin, {S. I.} and Gubaidulina, {R. H.}",
year = "2018",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/MSF.927.79",
language = "English",
isbn = "9783035713978",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "79--85",
editor = "Chinakhov, {Dmitry A.} and Chinakhov, {Dmitry A.}",
booktitle = "Materials and Processing Technology II",

}

TY - CHAP

T1 - Machining of titanium alloys with wave milling cutters

AU - Korovin, G. I.

AU - Petrushin, S. I.

AU - Gubaidulina, R. H.

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In the paper it is pointed out that machining of titanium alloys is the most difficult problem in metal cutting. The leading world companies are dealing with this problem, as titanium alloys are the basis of the aerospace industry. In the paper high-speed cutters with wavelike teeth edges used for titanium alloys processing are investigated. Every subsequent tooth is displaced at half-space distance. This reduces power load on the hardening of the machined surface. On the basis of power and wear-resistance studies, the advantage of wavy milling cutters in comparison with standard ones is established; it is proved that wavy cutters have a lower specific power load, greater wear resistance and less surface hardening.

AB - In the paper it is pointed out that machining of titanium alloys is the most difficult problem in metal cutting. The leading world companies are dealing with this problem, as titanium alloys are the basis of the aerospace industry. In the paper high-speed cutters with wavelike teeth edges used for titanium alloys processing are investigated. Every subsequent tooth is displaced at half-space distance. This reduces power load on the hardening of the machined surface. On the basis of power and wear-resistance studies, the advantage of wavy milling cutters in comparison with standard ones is established; it is proved that wavy cutters have a lower specific power load, greater wear resistance and less surface hardening.

KW - Chip formation

KW - Cutting tools

KW - Machining of titanium alloys

KW - Milling

KW - Wavy milling cutter

UR - http://www.scopus.com/inward/record.url?scp=85053002993&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053002993&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/MSF.927.79

DO - 10.4028/www.scientific.net/MSF.927.79

M3 - Chapter

SN - 9783035713978

T3 - Materials Science Forum

SP - 79

EP - 85

BT - Materials and Processing Technology II

A2 - Chinakhov, Dmitry A.

A2 - Chinakhov, Dmitry A.

PB - Trans Tech Publications Ltd

ER -