Laser-beam pattern cutting of carbon-based composites

D. M. Gureev, S. I. Kuznetsov, A. L. Petrov

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

The possibility of using laser radiation for pattern cutting of sheet carbon-based materials is analyzed. It is theoretically justified and experimentally demonstrated that continuous-wave laser radiation can be efficiently used only for pattern cutting of carbon-based plastics and carbon-carbonaceous composites with a thickness of up to 1.5 mm. For laser-beam pattern cutting of carbon-based composites of larger thickness, the use of pulse-recurrent radiation with high pulse-repetition rate in the multipass-cutting mode is promising.

Original languageEnglish
Pages (from-to)349-361
Number of pages13
JournalJournal of Russian Laser Research
Volume20
Issue number4
Publication statusPublished - 1999

Fingerprint

Laser beams
laser beams
Carbon
composite materials
carbon
Composite materials
Laser radiation
Pulse repetition rate
Continuous wave lasers
pulse repetition rate
continuous wave lasers
Laser modes
Laser pulses
plastics
Plastics
Radiation
radiation
pulses

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics

Cite this

Laser-beam pattern cutting of carbon-based composites. / Gureev, D. M.; Kuznetsov, S. I.; Petrov, A. L.

In: Journal of Russian Laser Research, Vol. 20, No. 4, 1999, p. 349-361.

Research output: Contribution to journalArticle

Gureev, D. M. ; Kuznetsov, S. I. ; Petrov, A. L. / Laser-beam pattern cutting of carbon-based composites. In: Journal of Russian Laser Research. 1999 ; Vol. 20, No. 4. pp. 349-361.
@article{c09cb97b6d8d499b8dcf31979508734c,
title = "Laser-beam pattern cutting of carbon-based composites",
abstract = "The possibility of using laser radiation for pattern cutting of sheet carbon-based materials is analyzed. It is theoretically justified and experimentally demonstrated that continuous-wave laser radiation can be efficiently used only for pattern cutting of carbon-based plastics and carbon-carbonaceous composites with a thickness of up to 1.5 mm. For laser-beam pattern cutting of carbon-based composites of larger thickness, the use of pulse-recurrent radiation with high pulse-repetition rate in the multipass-cutting mode is promising.",
author = "Gureev, {D. M.} and Kuznetsov, {S. I.} and Petrov, {A. L.}",
year = "1999",
language = "English",
volume = "20",
pages = "349--361",
journal = "Journal of Russian Laser Research",
issn = "1071-2836",
publisher = "Springer New York",
number = "4",

}

TY - JOUR

T1 - Laser-beam pattern cutting of carbon-based composites

AU - Gureev, D. M.

AU - Kuznetsov, S. I.

AU - Petrov, A. L.

PY - 1999

Y1 - 1999

N2 - The possibility of using laser radiation for pattern cutting of sheet carbon-based materials is analyzed. It is theoretically justified and experimentally demonstrated that continuous-wave laser radiation can be efficiently used only for pattern cutting of carbon-based plastics and carbon-carbonaceous composites with a thickness of up to 1.5 mm. For laser-beam pattern cutting of carbon-based composites of larger thickness, the use of pulse-recurrent radiation with high pulse-repetition rate in the multipass-cutting mode is promising.

AB - The possibility of using laser radiation for pattern cutting of sheet carbon-based materials is analyzed. It is theoretically justified and experimentally demonstrated that continuous-wave laser radiation can be efficiently used only for pattern cutting of carbon-based plastics and carbon-carbonaceous composites with a thickness of up to 1.5 mm. For laser-beam pattern cutting of carbon-based composites of larger thickness, the use of pulse-recurrent radiation with high pulse-repetition rate in the multipass-cutting mode is promising.

UR - http://www.scopus.com/inward/record.url?scp=22844454776&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=22844454776&partnerID=8YFLogxK

M3 - Article

VL - 20

SP - 349

EP - 361

JO - Journal of Russian Laser Research

JF - Journal of Russian Laser Research

SN - 1071-2836

IS - 4

ER -