Investigation on the elemental chip formation process in hard-to- machine material cutting

A. A. Lasukov, P. A. Chazov, A. V. Barsuk

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Abstract

The mechanism of discontinuous chip formation has been studied less than the mechanism of continuous chip formation. However, when most modern materials having specific physical and mechanical properties are subject to machining, such processes are featured by discontinuous chip formation. The paper describes the basic dependencies of discontinuous chip parameters on machining modes. This is a trial undertaken to introduce an explanation of how the basic factors of the cutting process influence over parameters of chip formation.

Original languageEnglish
Title of host publicationInnovative Technologies and Economics in Engineering
EditorsD.A. Chinakhov, D.A. Chinakhov
PublisherTrans Tech Publications Ltd
Pages504-509
Number of pages6
ISBN (Electronic)9783038352815, 9783038352815
DOIs
Publication statusPublished - 1 Jan 2014
Event5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014 - Yurga, Russian Federation
Duration: 22 May 201423 May 2014

Publication series

NameApplied Mechanics and Materials
Volume682
ISSN (Print)1660-9336
ISSN (Electronic)1662-7482

Conference

Conference5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014
CountryRussian Federation
CityYurga
Period22.5.1423.5.14

Fingerprint

Machining
Physical properties
Mechanical properties

Keywords

  • Chip formation
  • Continuity rate
  • Cutting tool
  • Discontinuous chip
  • Elements pitch

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Lasukov, A. A., Chazov, P. A., & Barsuk, A. V. (2014). Investigation on the elemental chip formation process in hard-to- machine material cutting. In D. A. Chinakhov, & D. A. Chinakhov (Eds.), Innovative Technologies and Economics in Engineering (pp. 504-509). (Applied Mechanics and Materials; Vol. 682). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.682.504

Investigation on the elemental chip formation process in hard-to- machine material cutting. / Lasukov, A. A.; Chazov, P. A.; Barsuk, A. V.

Innovative Technologies and Economics in Engineering. ed. / D.A. Chinakhov; D.A. Chinakhov. Trans Tech Publications Ltd, 2014. p. 504-509 (Applied Mechanics and Materials; Vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lasukov, AA, Chazov, PA & Barsuk, AV 2014, Investigation on the elemental chip formation process in hard-to- machine material cutting. in DA Chinakhov & DA Chinakhov (eds), Innovative Technologies and Economics in Engineering. Applied Mechanics and Materials, vol. 682, Trans Tech Publications Ltd, pp. 504-509, 5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014, Yurga, Russian Federation, 22.5.14. https://doi.org/10.4028/www.scientific.net/AMM.682.504
Lasukov AA, Chazov PA, Barsuk AV. Investigation on the elemental chip formation process in hard-to- machine material cutting. In Chinakhov DA, Chinakhov DA, editors, Innovative Technologies and Economics in Engineering. Trans Tech Publications Ltd. 2014. p. 504-509. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.682.504
Lasukov, A. A. ; Chazov, P. A. ; Barsuk, A. V. / Investigation on the elemental chip formation process in hard-to- machine material cutting. Innovative Technologies and Economics in Engineering. editor / D.A. Chinakhov ; D.A. Chinakhov. Trans Tech Publications Ltd, 2014. pp. 504-509 (Applied Mechanics and Materials).
@inproceedings{40b1e5027b98423283d81705c0083d92,
title = "Investigation on the elemental chip formation process in hard-to- machine material cutting",
abstract = "The mechanism of discontinuous chip formation has been studied less than the mechanism of continuous chip formation. However, when most modern materials having specific physical and mechanical properties are subject to machining, such processes are featured by discontinuous chip formation. The paper describes the basic dependencies of discontinuous chip parameters on machining modes. This is a trial undertaken to introduce an explanation of how the basic factors of the cutting process influence over parameters of chip formation.",
keywords = "Chip formation, Continuity rate, Cutting tool, Discontinuous chip, Elements pitch",
author = "Lasukov, {A. A.} and Chazov, {P. A.} and Barsuk, {A. V.}",
year = "2014",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/AMM.682.504",
language = "English",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "504--509",
editor = "D.A. Chinakhov and D.A. Chinakhov",
booktitle = "Innovative Technologies and Economics in Engineering",

}

TY - GEN

T1 - Investigation on the elemental chip formation process in hard-to- machine material cutting

AU - Lasukov, A. A.

AU - Chazov, P. A.

AU - Barsuk, A. V.

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The mechanism of discontinuous chip formation has been studied less than the mechanism of continuous chip formation. However, when most modern materials having specific physical and mechanical properties are subject to machining, such processes are featured by discontinuous chip formation. The paper describes the basic dependencies of discontinuous chip parameters on machining modes. This is a trial undertaken to introduce an explanation of how the basic factors of the cutting process influence over parameters of chip formation.

AB - The mechanism of discontinuous chip formation has been studied less than the mechanism of continuous chip formation. However, when most modern materials having specific physical and mechanical properties are subject to machining, such processes are featured by discontinuous chip formation. The paper describes the basic dependencies of discontinuous chip parameters on machining modes. This is a trial undertaken to introduce an explanation of how the basic factors of the cutting process influence over parameters of chip formation.

KW - Chip formation

KW - Continuity rate

KW - Cutting tool

KW - Discontinuous chip

KW - Elements pitch

UR - http://www.scopus.com/inward/record.url?scp=84921851147&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84921851147&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.682.504

DO - 10.4028/www.scientific.net/AMM.682.504

M3 - Conference contribution

AN - SCOPUS:84921851147

T3 - Applied Mechanics and Materials

SP - 504

EP - 509

BT - Innovative Technologies and Economics in Engineering

A2 - Chinakhov, D.A.

A2 - Chinakhov, D.A.

PB - Trans Tech Publications Ltd

ER -