Abstract
Experimental investigation water and saline solution drops evaporation on a solid substrate made of anodized aluminum is presented in the paper. Parameters characterizing drop profile have been obtained (contact angle, contact diameter, height). The specific evaporation rate has been calculated from obtained values. It was found that water and saline solution drops with concentration up to 9.1% evaporate in the pinning mode. However, with increasing the salt concentration in the solution up to 16.7% spreading mode was observed. Two stages of drop evaporation depending on change of the evaporation rate have been separated.
| Original language | English |
|---|---|
| Title of host publication | MATEC Web of Conferences |
| Publisher | EDP Sciences |
| Volume | 19 |
| DOIs | |
| Publication status | Published - 15 Dec 2014 |
| Event | 2nd International Youth Forum "Smart Grids" - Tomsk, Russian Federation Duration: 6 Oct 2014 → 10 Oct 2014 |
Other
| Other | 2nd International Youth Forum "Smart Grids" |
|---|---|
| Country | Russian Federation |
| City | Tomsk |
| Period | 6.10.14 → 10.10.14 |
Fingerprint
ASJC Scopus subject areas
- Chemistry(all)
- Engineering(all)
- Materials Science(all)
Cite this
Investigation of water and saline solution drops evaporation on a solid substrate. / Orlova, Evgenija G.; Kuznetsov, Geniy V.
MATEC Web of Conferences. Vol. 19 EDP Sciences, 2014. 01006.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Investigation of water and saline solution drops evaporation on a solid substrate
AU - Orlova, Evgenija G.
AU - Kuznetsov, Geniy V.
PY - 2014/12/15
Y1 - 2014/12/15
N2 - Experimental investigation water and saline solution drops evaporation on a solid substrate made of anodized aluminum is presented in the paper. Parameters characterizing drop profile have been obtained (contact angle, contact diameter, height). The specific evaporation rate has been calculated from obtained values. It was found that water and saline solution drops with concentration up to 9.1% evaporate in the pinning mode. However, with increasing the salt concentration in the solution up to 16.7% spreading mode was observed. Two stages of drop evaporation depending on change of the evaporation rate have been separated.
AB - Experimental investigation water and saline solution drops evaporation on a solid substrate made of anodized aluminum is presented in the paper. Parameters characterizing drop profile have been obtained (contact angle, contact diameter, height). The specific evaporation rate has been calculated from obtained values. It was found that water and saline solution drops with concentration up to 9.1% evaporate in the pinning mode. However, with increasing the salt concentration in the solution up to 16.7% spreading mode was observed. Two stages of drop evaporation depending on change of the evaporation rate have been separated.
UR - http://www.scopus.com/inward/record.url?scp=84921286221&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84921286221&partnerID=8YFLogxK
U2 - 10.1051/matecconf/20141901006
DO - 10.1051/matecconf/20141901006
M3 - Conference contribution
AN - SCOPUS:84921286221
VL - 19
BT - MATEC Web of Conferences
PB - EDP Sciences
ER -