Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools

Daniel Vlasceanu, Cosmin Cotrut, Mihai Tarcolea, Florin Baciu, Mariana Nicodim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Hard coatings based on hard materials are especially suitable for the purposes of protection against metallurgical tools wear. The properties involving high hardness and thermal stability with low wear resistance and friction coefficient are the main goal to achieve. Hard materials such as WC are widely used as cutting tools material due to their high hardness, strength and fracture toughness. Elemental composition and topography, of the coatings, it was determined by the SEM method. Phase composition and texture has studied by X-ray diffraction technique. The mechanical property of coatings has investigated by microhardness measurement and scratch test. The results of experimental research proved that the investigated coatings exhibited a high microhardness having good adhesion on the substrate (> 50 N).

Original languageEnglish
Title of host publicationAnnals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation
Subtitle of host publicationFocus on Next Generation of Intelligent Systems and Solutions"
PublisherDanube Adria Association for Automation and Manufacturing, DAAAM
Pages1487-1488
Number of pages2
ISBN (Print)9783901509681
Publication statusPublished - 1 Jan 2008
Externally publishedYes
EventAnnals of DAAAM for 2008 and 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions" - Trnava, Slovakia
Duration: 22 Oct 200825 Oct 2008

Publication series

NameAnnals of DAAAM and Proceedings of the International DAAAM Symposium
ISSN (Print)1726-9679

Conference

ConferenceAnnals of DAAAM for 2008 and 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions"
CountrySlovakia
CityTrnava
Period22.10.0825.10.08

Fingerprint

Physical vapor deposition
Cutting tools
Magnetron sputtering
Coatings
Microhardness
Hardness
Hard coatings
Phase composition
Topography
Wear resistance
Fracture toughness
Thermodynamic stability
Adhesion
Textures
Wear of materials
Friction
X ray diffraction
Mechanical properties
Scanning electron microscopy
Substrates

Keywords

  • Hard coating
  • Microhardness
  • SEM
  • Sputtering
  • XRD

ASJC Scopus subject areas

  • Computer Science Applications
  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Vlasceanu, D., Cotrut, C., Tarcolea, M., Baciu, F., & Nicodim, M. (2008). Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools. In Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions" (pp. 1487-1488). (Annals of DAAAM and Proceedings of the International DAAAM Symposium). Danube Adria Association for Automation and Manufacturing, DAAAM.

Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools. / Vlasceanu, Daniel; Cotrut, Cosmin; Tarcolea, Mihai; Baciu, Florin; Nicodim, Mariana.

Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, 2008. p. 1487-1488 (Annals of DAAAM and Proceedings of the International DAAAM Symposium).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vlasceanu, D, Cotrut, C, Tarcolea, M, Baciu, F & Nicodim, M 2008, Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools. in Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions". Annals of DAAAM and Proceedings of the International DAAAM Symposium, Danube Adria Association for Automation and Manufacturing, DAAAM, pp. 1487-1488, Annals of DAAAM for 2008 and 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions", Trnava, Slovakia, 22.10.08.
Vlasceanu D, Cotrut C, Tarcolea M, Baciu F, Nicodim M. Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools. In Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM. 2008. p. 1487-1488. (Annals of DAAAM and Proceedings of the International DAAAM Symposium).
Vlasceanu, Daniel ; Cotrut, Cosmin ; Tarcolea, Mihai ; Baciu, Florin ; Nicodim, Mariana. / Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools. Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation: Focus on Next Generation of Intelligent Systems and Solutions". Danube Adria Association for Automation and Manufacturing, DAAAM, 2008. pp. 1487-1488 (Annals of DAAAM and Proceedings of the International DAAAM Symposium).
@inproceedings{aef9a6d3db864852856e9c32dd5031c1,
title = "Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools",
abstract = "Hard coatings based on hard materials are especially suitable for the purposes of protection against metallurgical tools wear. The properties involving high hardness and thermal stability with low wear resistance and friction coefficient are the main goal to achieve. Hard materials such as WC are widely used as cutting tools material due to their high hardness, strength and fracture toughness. Elemental composition and topography, of the coatings, it was determined by the SEM method. Phase composition and texture has studied by X-ray diffraction technique. The mechanical property of coatings has investigated by microhardness measurement and scratch test. The results of experimental research proved that the investigated coatings exhibited a high microhardness having good adhesion on the substrate (> 50 N).",
keywords = "Hard coating, Microhardness, SEM, Sputtering, XRD",
author = "Daniel Vlasceanu and Cosmin Cotrut and Mihai Tarcolea and Florin Baciu and Mariana Nicodim",
year = "2008",
month = "1",
day = "1",
language = "English",
isbn = "9783901509681",
series = "Annals of DAAAM and Proceedings of the International DAAAM Symposium",
publisher = "Danube Adria Association for Automation and Manufacturing, DAAAM",
pages = "1487--1488",
booktitle = "Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium {"}Intelligent Manufacturing and Automation",

}

TY - GEN

T1 - Investigation of the hard films deposited by PVD-magnetron sputtering on the cutting tools

AU - Vlasceanu, Daniel

AU - Cotrut, Cosmin

AU - Tarcolea, Mihai

AU - Baciu, Florin

AU - Nicodim, Mariana

PY - 2008/1/1

Y1 - 2008/1/1

N2 - Hard coatings based on hard materials are especially suitable for the purposes of protection against metallurgical tools wear. The properties involving high hardness and thermal stability with low wear resistance and friction coefficient are the main goal to achieve. Hard materials such as WC are widely used as cutting tools material due to their high hardness, strength and fracture toughness. Elemental composition and topography, of the coatings, it was determined by the SEM method. Phase composition and texture has studied by X-ray diffraction technique. The mechanical property of coatings has investigated by microhardness measurement and scratch test. The results of experimental research proved that the investigated coatings exhibited a high microhardness having good adhesion on the substrate (> 50 N).

AB - Hard coatings based on hard materials are especially suitable for the purposes of protection against metallurgical tools wear. The properties involving high hardness and thermal stability with low wear resistance and friction coefficient are the main goal to achieve. Hard materials such as WC are widely used as cutting tools material due to their high hardness, strength and fracture toughness. Elemental composition and topography, of the coatings, it was determined by the SEM method. Phase composition and texture has studied by X-ray diffraction technique. The mechanical property of coatings has investigated by microhardness measurement and scratch test. The results of experimental research proved that the investigated coatings exhibited a high microhardness having good adhesion on the substrate (> 50 N).

KW - Hard coating

KW - Microhardness

KW - SEM

KW - Sputtering

KW - XRD

UR - http://www.scopus.com/inward/record.url?scp=84904345369&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84904345369&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9783901509681

T3 - Annals of DAAAM and Proceedings of the International DAAAM Symposium

SP - 1487

EP - 1488

BT - Annals of DAAAM for 2008 and Proceedings of the 19th International DAAAM Symposium "Intelligent Manufacturing and Automation

PB - Danube Adria Association for Automation and Manufacturing, DAAAM

ER -