Investigation of structures and properties of oxide-hydroxide systems after mechanical activation

R. V. Levkov, S. N. Kulkov

Research output: Contribution to journalConference article

Abstract

It has been studied Al2O3 and ZrO2 with Al(OH)3mixtures after mechanical activation in a planetary ball mill.Measurement of the specific surface by the BET method has shown that an increase of mechanical treatment time leads to an increase in the specific surface in all studied powders. In the initial states a large agglomerate of the order of 50-150 μm and isolated particles of 0.05-0.1 μm were observed. Mechanical treatment leads to fracture of agglomerates into separate particles. It has been revealed that the amount of agglomerates decreased with the increasing of the mechanical activation time, and the number of isolated particles increased. The average size of the agglomerates of Al-based powders varies in the range of 50-15 μm. In the case of powders based on ZrO2, it varies in the range of 10-14 μm.

Original languageEnglish
Article number012040
JournalIOP Conference Series: Materials Science and Engineering
Volume613
Issue number1
DOIs
Publication statusPublished - 4 Nov 2019
Event5th International Conference on Competitive Materials and Technology Processes, IC-CMTP 2018 - Miskolc-Lillafured, Hungary
Duration: 8 Oct 201812 Oct 2018

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Investigation of structures and properties of oxide-hydroxide systems after mechanical activation'. Together they form a unique fingerprint.

  • Cite this