Investigation of elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB

Abstract

Paper discuss the elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB. During the analysis of the results of the study it was determined that the reason for the failure of the springs was the insufficient difference between the maximum shearing stress and the shearing stress under the working deformation. It was also found that the endurance of the cylindrical springs depends not only on the magnitude of the maximum operating voltage, but also on the amplitude of the oscillations themselves.

Original language	English
Article number	042017
Journal	IOP Conference Series: Earth and Environmental Science
Volume	421
Issue number	4
DOIs	https://doi.org/10.1088/1755-1315/421/4/042017
Publication status	Published - 7 Jan 2020
Event	2nd International Scientific Conference on Agribusiness, Environmental Engineering and Biotechnologies, AGRITECH-II 2019 - Krasnoyarsk, Russian Federation Duration: 13 Nov 2019 → 14 Nov 2019

ASJC Scopus subject areas

Environmental Science(all)
Earth and Planetary Sciences(all)

Access to Document

10.1088/1755-1315/421/4/042017

Fingerprint Dive into the research topics of 'Investigation of elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB'. Together they form a unique fingerprint.

Cite this

Investigation of elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB. / Medvedev, V. I.; Ivanshchikov, Yu V.; Novikov, A. M.; Pushkarenko, N. N.; Dobrokhotov, Yu N.; Galtseva, O. V.

In: IOP Conference Series: Earth and Environmental Science, Vol. 421, No. 4, 042017, 07.01.2020.

Research output: Contribution to journal › Conference article › peer-review

@article{fb4128ecf8d84327bb2eb2b043982f52,

title = "Investigation of elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB",

abstract = "Paper discuss the elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB. During the analysis of the results of the study it was determined that the reason for the failure of the springs was the insufficient difference between the maximum shearing stress and the shearing stress under the working deformation. It was also found that the endurance of the cylindrical springs depends not only on the magnitude of the maximum operating voltage, but also on the amplitude of the oscillations themselves.",

author = "Medvedev, {V. I.} and Ivanshchikov, {Yu V.} and Novikov, {A. M.} and Pushkarenko, {N. N.} and Dobrokhotov, {Yu N.} and Galtseva, {O. V.}",

year = "2020",

month = jan,

day = "7",

doi = "10.1088/1755-1315/421/4/042017",

language = "English",

volume = "421",

journal = "IOP Conference Series: Earth and Environmental Science",

issn = "1755-1307",

publisher = "IOP Publishing Ltd.",

number = "4",

note = "2nd International Scientific Conference on Agribusiness, Environmental Engineering and Biotechnologies, AGRITECH-II 2019 ; Conference date: 13-11-2019 Through 14-11-2019",

}

TY - JOUR

T1 - Investigation of elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB

AU - Medvedev, V. I.

AU - Ivanshchikov, Yu V.

AU - Novikov, A. M.

AU - Pushkarenko, N. N.

AU - Dobrokhotov, Yu N.

AU - Galtseva, O. V.

PY - 2020/1/7

Y1 - 2020/1/7

N2 - Paper discuss the elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB. During the analysis of the results of the study it was determined that the reason for the failure of the springs was the insufficient difference between the maximum shearing stress and the shearing stress under the working deformation. It was also found that the endurance of the cylindrical springs depends not only on the magnitude of the maximum operating voltage, but also on the amplitude of the oscillations themselves.

AB - Paper discuss the elastic properties of helical springs of the control unit of the gearbox 25.01-15-20 SB. During the analysis of the results of the study it was determined that the reason for the failure of the springs was the insufficient difference between the maximum shearing stress and the shearing stress under the working deformation. It was also found that the endurance of the cylindrical springs depends not only on the magnitude of the maximum operating voltage, but also on the amplitude of the oscillations themselves.

UR - http://www.scopus.com/inward/record.url?scp=85078676906&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85078676906&partnerID=8YFLogxK

U2 - 10.1088/1755-1315/421/4/042017

DO - 10.1088/1755-1315/421/4/042017

M3 - Conference article

AN - SCOPUS:85078676906

VL - 421

JO - IOP Conference Series: Earth and Environmental Science

JF - IOP Conference Series: Earth and Environmental Science

SN - 1755-1307

IS - 4

M1 - 042017

T2 - 2nd International Scientific Conference on Agribusiness, Environmental Engineering and Biotechnologies, AGRITECH-II 2019

Y2 - 13 November 2019 through 14 November 2019

ER -