Investigation of disruption dynamics of the horizontal liquid layer with spot heating from the substrate side

Yu V. Lyulin, S. E. Spesivtsev, I. V. Marchuk, O. A. Kabov

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

Disruption of thin (0.3–0.7 mm) horizontal layers of liquid (ethanol) was experimentally investigated during local heating with the substrate side at a heater diameter of 1.6 mm. The influence of the liquid layer thickness and the heating intensity on rupture dynamics was investigated. Visualization and inspection of the liquid layer were realized using the schlieren and shadow methods. General steps of the disruption are determined and the average formation rate of the dry spot is measured, which is 0.2–4 mm/s and increases with increasing of both the layer thickness and the heat flux. It is shown that one of the general factors that affect the rupture dynamics of the liquid layer and the formation of the dry spot in the area of local heating apart from the thermocapillary effect is evaporation.

Original languageEnglish
Pages (from-to)1034-1037
Number of pages4
JournalTechnical Physics Letters
Volume41
Issue number11
DOIs
Publication statusPublished - 1 Nov 2015

Fingerprint

heating
liquids
heaters
heat flux
inspection
ethyl alcohol
evaporation

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)

Cite this

Investigation of disruption dynamics of the horizontal liquid layer with spot heating from the substrate side. / Lyulin, Yu V.; Spesivtsev, S. E.; Marchuk, I. V.; Kabov, O. A.

In: Technical Physics Letters, Vol. 41, No. 11, 01.11.2015, p. 1034-1037.

Research output: Contribution to journalArticle

@article{3f18865c873044e0af26033bb1931d97,
title = "Investigation of disruption dynamics of the horizontal liquid layer with spot heating from the substrate side",
abstract = "Disruption of thin (0.3–0.7 mm) horizontal layers of liquid (ethanol) was experimentally investigated during local heating with the substrate side at a heater diameter of 1.6 mm. The influence of the liquid layer thickness and the heating intensity on rupture dynamics was investigated. Visualization and inspection of the liquid layer were realized using the schlieren and shadow methods. General steps of the disruption are determined and the average formation rate of the dry spot is measured, which is 0.2–4 mm/s and increases with increasing of both the layer thickness and the heat flux. It is shown that one of the general factors that affect the rupture dynamics of the liquid layer and the formation of the dry spot in the area of local heating apart from the thermocapillary effect is evaporation.",
author = "Lyulin, {Yu V.} and Spesivtsev, {S. E.} and Marchuk, {I. V.} and Kabov, {O. A.}",
year = "2015",
month = "11",
day = "1",
doi = "10.1134/S106378501511005X",
language = "English",
volume = "41",
pages = "1034--1037",
journal = "Technical Physics Letters",
issn = "1063-7850",
publisher = "Maik Nauka-Interperiodica Publishing",
number = "11",

}

TY - JOUR

T1 - Investigation of disruption dynamics of the horizontal liquid layer with spot heating from the substrate side

AU - Lyulin, Yu V.

AU - Spesivtsev, S. E.

AU - Marchuk, I. V.

AU - Kabov, O. A.

PY - 2015/11/1

Y1 - 2015/11/1

N2 - Disruption of thin (0.3–0.7 mm) horizontal layers of liquid (ethanol) was experimentally investigated during local heating with the substrate side at a heater diameter of 1.6 mm. The influence of the liquid layer thickness and the heating intensity on rupture dynamics was investigated. Visualization and inspection of the liquid layer were realized using the schlieren and shadow methods. General steps of the disruption are determined and the average formation rate of the dry spot is measured, which is 0.2–4 mm/s and increases with increasing of both the layer thickness and the heat flux. It is shown that one of the general factors that affect the rupture dynamics of the liquid layer and the formation of the dry spot in the area of local heating apart from the thermocapillary effect is evaporation.

AB - Disruption of thin (0.3–0.7 mm) horizontal layers of liquid (ethanol) was experimentally investigated during local heating with the substrate side at a heater diameter of 1.6 mm. The influence of the liquid layer thickness and the heating intensity on rupture dynamics was investigated. Visualization and inspection of the liquid layer were realized using the schlieren and shadow methods. General steps of the disruption are determined and the average formation rate of the dry spot is measured, which is 0.2–4 mm/s and increases with increasing of both the layer thickness and the heat flux. It is shown that one of the general factors that affect the rupture dynamics of the liquid layer and the formation of the dry spot in the area of local heating apart from the thermocapillary effect is evaporation.

UR - http://www.scopus.com/inward/record.url?scp=84958167878&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84958167878&partnerID=8YFLogxK

U2 - 10.1134/S106378501511005X

DO - 10.1134/S106378501511005X

M3 - Article

VL - 41

SP - 1034

EP - 1037

JO - Technical Physics Letters

JF - Technical Physics Letters

SN - 1063-7850

IS - 11

ER -