Investigation converter circuit 〈voltage-current〉 for power calibrator

Research output: Contribution to journalArticle

Abstract

The paper presents alternative circuits for voltage-current converters to be used in the calibrator of fictitious power. The experimental studies have revealed a number of problems related to the stability of the system in deep feedback and zero level stabilization of the amplifier. The circuit solutions given in the article allow elimination of these problems and improve the accuracy of calibrator current calibration. For example, correction/corrective circuits are used to ensure the stability of the converter at deep depths of the feedback, and operational amplifier based circuit solution and compensation condition are proposed to reduce the additional phase shift. To improve the accuracy of the calibration current values specified by the calibrator we propose to connect the feedback circuit to the measuring current transformer. However, further improvement of the accuracy class of the power calibrator is impossible without modern electronic components.

Original languageEnglish
Article number012053
JournalJournal of Physics: Conference Series
Volume671
Issue number1
DOIs
Publication statusPublished - 18 Jan 2016

Fingerprint

converters
electric potential
feedback amplifiers
feedback circuits
operational amplifiers
transformers
elimination
phase shift
amplifiers
stabilization
electronics

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Investigation converter circuit 〈voltage-current〉 for power calibrator. / Fomichev, Yu M.; Silushkin, S. V.; Larioshina, Irina Anatolievna.

In: Journal of Physics: Conference Series, Vol. 671, No. 1, 012053, 18.01.2016.

Research output: Contribution to journalArticle

@article{8a44338070d54e62bc8f7a9fa0a2b061,
title = "Investigation converter circuit 〈voltage-current〉 for power calibrator",
abstract = "The paper presents alternative circuits for voltage-current converters to be used in the calibrator of fictitious power. The experimental studies have revealed a number of problems related to the stability of the system in deep feedback and zero level stabilization of the amplifier. The circuit solutions given in the article allow elimination of these problems and improve the accuracy of calibrator current calibration. For example, correction/corrective circuits are used to ensure the stability of the converter at deep depths of the feedback, and operational amplifier based circuit solution and compensation condition are proposed to reduce the additional phase shift. To improve the accuracy of the calibration current values specified by the calibrator we propose to connect the feedback circuit to the measuring current transformer. However, further improvement of the accuracy class of the power calibrator is impossible without modern electronic components.",
author = "Fomichev, {Yu M.} and Silushkin, {S. V.} and Larioshina, {Irina Anatolievna}",
year = "2016",
month = "1",
day = "18",
doi = "10.1088/1742-6596/671/1/012053",
language = "English",
volume = "671",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Investigation converter circuit 〈voltage-current〉 for power calibrator

AU - Fomichev, Yu M.

AU - Silushkin, S. V.

AU - Larioshina, Irina Anatolievna

PY - 2016/1/18

Y1 - 2016/1/18

N2 - The paper presents alternative circuits for voltage-current converters to be used in the calibrator of fictitious power. The experimental studies have revealed a number of problems related to the stability of the system in deep feedback and zero level stabilization of the amplifier. The circuit solutions given in the article allow elimination of these problems and improve the accuracy of calibrator current calibration. For example, correction/corrective circuits are used to ensure the stability of the converter at deep depths of the feedback, and operational amplifier based circuit solution and compensation condition are proposed to reduce the additional phase shift. To improve the accuracy of the calibration current values specified by the calibrator we propose to connect the feedback circuit to the measuring current transformer. However, further improvement of the accuracy class of the power calibrator is impossible without modern electronic components.

AB - The paper presents alternative circuits for voltage-current converters to be used in the calibrator of fictitious power. The experimental studies have revealed a number of problems related to the stability of the system in deep feedback and zero level stabilization of the amplifier. The circuit solutions given in the article allow elimination of these problems and improve the accuracy of calibrator current calibration. For example, correction/corrective circuits are used to ensure the stability of the converter at deep depths of the feedback, and operational amplifier based circuit solution and compensation condition are proposed to reduce the additional phase shift. To improve the accuracy of the calibration current values specified by the calibrator we propose to connect the feedback circuit to the measuring current transformer. However, further improvement of the accuracy class of the power calibrator is impossible without modern electronic components.

UR - http://www.scopus.com/inward/record.url?scp=84960172164&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84960172164&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/671/1/012053

DO - 10.1088/1742-6596/671/1/012053

M3 - Article

VL - 671

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 1

M1 - 012053

ER -