Investigation and development of Au-vapor UV laser

V. N. Borisov, A. M. Gorokhov, G. S. Evtushenko, A. E. Kirilov, V. L. Kruglyakov, N. A. Filonova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The study of a possibility to construct the Au-vapor sealed off laser which generates both in the visible (λ = 627.8 nm) and UV (λ = 312.2 nm) was carried out. Application of the laser to some problems of the atmosphere sounding may be a matter of great interest. An analysis of the literature data has shown the requirements to pumping of the Au-vapor laser on the 312.2 nm transition to be harder than on the 627.8 nm one. This fact explains only a few available publications on Au-vapor generation mechanism of UV laser. In our experiment an active element was made of beryllium on ceramic basis of 20 mm in diameter and 800 mm in length. Quartz locks controlled by an external permanent magnet were used to protect the output windows from dust.

Original languageEnglish
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
Place of PublicationBellingham, WA, United States
PublisherPubl by Int Soc for Optical Engineering
Pages410-412
Number of pages3
Volume1811
ISBN (Print)081941011X
Publication statusPublished - 1992
EventTenth All-Union Symposium on High Resolution Molecular Spectroscopy - Omsk, Russia
Duration: 2 Jun 19916 Jun 1991

Other

OtherTenth All-Union Symposium on High Resolution Molecular Spectroscopy
CityOmsk, Russia
Period2.6.916.6.91

Fingerprint

ultraviolet lasers
Vapors
vapors
Lasers
lasers
beryllium
sounding
permanent magnets
Pumping (laser)
Beryllium
pumping
quartz
dust
ceramics
Permanent magnets
Dust
Quartz
atmospheres
requirements
output

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Borisov, V. N., Gorokhov, A. M., Evtushenko, G. S., Kirilov, A. E., Kruglyakov, V. L., & Filonova, N. A. (1992). Investigation and development of Au-vapor UV laser. In Proceedings of SPIE - The International Society for Optical Engineering (Vol. 1811, pp. 410-412). Bellingham, WA, United States: Publ by Int Soc for Optical Engineering.

Investigation and development of Au-vapor UV laser. / Borisov, V. N.; Gorokhov, A. M.; Evtushenko, G. S.; Kirilov, A. E.; Kruglyakov, V. L.; Filonova, N. A.

Proceedings of SPIE - The International Society for Optical Engineering. Vol. 1811 Bellingham, WA, United States : Publ by Int Soc for Optical Engineering, 1992. p. 410-412.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Borisov, VN, Gorokhov, AM, Evtushenko, GS, Kirilov, AE, Kruglyakov, VL & Filonova, NA 1992, Investigation and development of Au-vapor UV laser. in Proceedings of SPIE - The International Society for Optical Engineering. vol. 1811, Publ by Int Soc for Optical Engineering, Bellingham, WA, United States, pp. 410-412, Tenth All-Union Symposium on High Resolution Molecular Spectroscopy, Omsk, Russia, 2.6.91.
Borisov VN, Gorokhov AM, Evtushenko GS, Kirilov AE, Kruglyakov VL, Filonova NA. Investigation and development of Au-vapor UV laser. In Proceedings of SPIE - The International Society for Optical Engineering. Vol. 1811. Bellingham, WA, United States: Publ by Int Soc for Optical Engineering. 1992. p. 410-412
Borisov, V. N. ; Gorokhov, A. M. ; Evtushenko, G. S. ; Kirilov, A. E. ; Kruglyakov, V. L. ; Filonova, N. A. / Investigation and development of Au-vapor UV laser. Proceedings of SPIE - The International Society for Optical Engineering. Vol. 1811 Bellingham, WA, United States : Publ by Int Soc for Optical Engineering, 1992. pp. 410-412
@inproceedings{4fc29536a19049f2a799cb3e66e0912b,
title = "Investigation and development of Au-vapor UV laser",
abstract = "The study of a possibility to construct the Au-vapor sealed off laser which generates both in the visible (λ = 627.8 nm) and UV (λ = 312.2 nm) was carried out. Application of the laser to some problems of the atmosphere sounding may be a matter of great interest. An analysis of the literature data has shown the requirements to pumping of the Au-vapor laser on the 312.2 nm transition to be harder than on the 627.8 nm one. This fact explains only a few available publications on Au-vapor generation mechanism of UV laser. In our experiment an active element was made of beryllium on ceramic basis of 20 mm in diameter and 800 mm in length. Quartz locks controlled by an external permanent magnet were used to protect the output windows from dust.",
author = "Borisov, {V. N.} and Gorokhov, {A. M.} and Evtushenko, {G. S.} and Kirilov, {A. E.} and Kruglyakov, {V. L.} and Filonova, {N. A.}",
year = "1992",
language = "English",
isbn = "081941011X",
volume = "1811",
pages = "410--412",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",
publisher = "Publ by Int Soc for Optical Engineering",

}

TY - GEN

T1 - Investigation and development of Au-vapor UV laser

AU - Borisov, V. N.

AU - Gorokhov, A. M.

AU - Evtushenko, G. S.

AU - Kirilov, A. E.

AU - Kruglyakov, V. L.

AU - Filonova, N. A.

PY - 1992

Y1 - 1992

N2 - The study of a possibility to construct the Au-vapor sealed off laser which generates both in the visible (λ = 627.8 nm) and UV (λ = 312.2 nm) was carried out. Application of the laser to some problems of the atmosphere sounding may be a matter of great interest. An analysis of the literature data has shown the requirements to pumping of the Au-vapor laser on the 312.2 nm transition to be harder than on the 627.8 nm one. This fact explains only a few available publications on Au-vapor generation mechanism of UV laser. In our experiment an active element was made of beryllium on ceramic basis of 20 mm in diameter and 800 mm in length. Quartz locks controlled by an external permanent magnet were used to protect the output windows from dust.

AB - The study of a possibility to construct the Au-vapor sealed off laser which generates both in the visible (λ = 627.8 nm) and UV (λ = 312.2 nm) was carried out. Application of the laser to some problems of the atmosphere sounding may be a matter of great interest. An analysis of the literature data has shown the requirements to pumping of the Au-vapor laser on the 312.2 nm transition to be harder than on the 627.8 nm one. This fact explains only a few available publications on Au-vapor generation mechanism of UV laser. In our experiment an active element was made of beryllium on ceramic basis of 20 mm in diameter and 800 mm in length. Quartz locks controlled by an external permanent magnet were used to protect the output windows from dust.

UR - http://www.scopus.com/inward/record.url?scp=0026965670&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0026965670&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0026965670

SN - 081941011X

VL - 1811

SP - 410

EP - 412

BT - Proceedings of SPIE - The International Society for Optical Engineering

PB - Publ by Int Soc for Optical Engineering

CY - Bellingham, WA, United States

ER -