Interference Switch of a Resonant Microwave Compressor with Distributed Switched Wave Power

Research output: Contribution to journalArticlepeer-review

Abstract

Abstract—An analysis is performed for the characteristics of an interference microwave switch with distributed switched wave power as a device for outputting energy from an active resonant microwave compressor. The proposed device is a cascade of conventional microwave switches based on H-tees connected in series with straight arms. It is shown that such a switch can multiply reduce the switched wave power by uniformly distributing it across the switches of the tees, which is done by adjusting the lengths of the tee arms. It was also established that between the lengths there is a functional relationship in which uniform distribution is achieved. The results of an experimental study of the microwave switch of two and/or three tees at low and high power are presented.

Original languageEnglish
Pages (from-to)275-282
Number of pages8
JournalJournal of Communications Technology and Electronics
Volume65
Issue number3
DOIs
Publication statusPublished - 1 Mar 2020

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Radiation
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Interference Switch of a Resonant Microwave Compressor with Distributed Switched Wave Power'. Together they form a unique fingerprint.

Cite this