Abstract
For wide use of coal and oil processing wastes in heat power industry we investigated the structural stability of coal-water slurries (CWS) and coal-water slurries containing petrochemicals (CWSP). Three methods of evaluating slurry stability were considered. The method of evaluation of separation (into layers) of the slurry was chosen to determine the stability of fuel compositions based on bituminous and brown coal, filter cakes of bituminous coals, waste motor, turbine, transformer, compressor oils, oil, oiled mixture and mazut. The experiments shown, that the addition of waste oils (with mass fraction of 10 %) to investigated fuel compositions leads to increase of slurry segmental stability is almost by 2 times.
| Original language | English |
|---|---|
| Article number | 01123 |
| Journal | MATEC Web of Conferences |
| Volume | 72 |
| DOIs | |
| Publication status | Published - 9 Aug 2016 |
| Event | Heat and Mass Transfer in the System of Thermal Modes of Energy - Technical and Technological Equipment, HMTTSC 2016 - Tomsk, Russian Federation Duration: 19 Apr 2016 → 21 Apr 2016 |
Fingerprint
ASJC Scopus subject areas
- Chemistry(all)
- Engineering(all)
- Materials Science(all)
Cite this
Integral Characteristics of Stability of Coal-Water Slurries and Coal-Water Slurries Containing Petrochemicals by Evaluation of Separation into Layers. / Dmitrienko, Margarita A.; Nyashina, Galina S.; Vershinina, Ksenia Yu; Lyrschikov, Sergey Yu.
In: MATEC Web of Conferences, Vol. 72, 01123, 09.08.2016.Research output: Contribution to journal › Conference article
}
TY - JOUR
T1 - Integral Characteristics of Stability of Coal-Water Slurries and Coal-Water Slurries Containing Petrochemicals by Evaluation of Separation into Layers
AU - Dmitrienko, Margarita A.
AU - Nyashina, Galina S.
AU - Vershinina, Ksenia Yu
AU - Lyrschikov, Sergey Yu
PY - 2016/8/9
Y1 - 2016/8/9
N2 - For wide use of coal and oil processing wastes in heat power industry we investigated the structural stability of coal-water slurries (CWS) and coal-water slurries containing petrochemicals (CWSP). Three methods of evaluating slurry stability were considered. The method of evaluation of separation (into layers) of the slurry was chosen to determine the stability of fuel compositions based on bituminous and brown coal, filter cakes of bituminous coals, waste motor, turbine, transformer, compressor oils, oil, oiled mixture and mazut. The experiments shown, that the addition of waste oils (with mass fraction of 10 %) to investigated fuel compositions leads to increase of slurry segmental stability is almost by 2 times.
AB - For wide use of coal and oil processing wastes in heat power industry we investigated the structural stability of coal-water slurries (CWS) and coal-water slurries containing petrochemicals (CWSP). Three methods of evaluating slurry stability were considered. The method of evaluation of separation (into layers) of the slurry was chosen to determine the stability of fuel compositions based on bituminous and brown coal, filter cakes of bituminous coals, waste motor, turbine, transformer, compressor oils, oil, oiled mixture and mazut. The experiments shown, that the addition of waste oils (with mass fraction of 10 %) to investigated fuel compositions leads to increase of slurry segmental stability is almost by 2 times.
UR - http://www.scopus.com/inward/record.url?scp=84984618954&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84984618954&partnerID=8YFLogxK
U2 - 10.1051/matecconf/20167201123
DO - 10.1051/matecconf/20167201123
M3 - Conference article
AN - SCOPUS:84984618954
VL - 72
JO - MATEC Web of Conferences
JF - MATEC Web of Conferences
SN - 2261-236X
M1 - 01123
ER -