Inspection methods of load-recording device 'Gamma-500'

A. V. Rogovyh, N. M. Natalinova, A. S. Spiridonova, A. S. Gordynets

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The load-recording device 'Gamma-500' is considered, which allows to obtain of the certification for the power supply for arc welding. In this paper, we show a principle of the device operation, analyze the normative documentation, and propose requirements to the device, both metrological and technical. The inspection methods, which allow to ensure the compliance with the safety requirements of low voltage equipment, have been specified. Correctly chosen inspection methods and test equipment provide reliable information for the tester.

Original languageEnglish
Title of host publication2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)9781479971022
DOIs
Publication statusPublished - 1 Jul 2015
Event2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Omsk, Russian Federation
Duration: 21 May 201523 May 2015

Conference

Conference2015 International Siberian Conference on Control and Communications, SIBCON 2015
CountryRussian Federation
CityOmsk
Period21.5.1523.5.15

Keywords

  • arc welding
  • inspection methods
  • load-recording device
  • power supply
  • voltage-current characteristics

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Control and Systems Engineering

Fingerprint Dive into the research topics of 'Inspection methods of load-recording device 'Gamma-500''. Together they form a unique fingerprint.

Cite this