This scientific work is devoted to the study results of water injection process into the well at the hydrodynamic research by using the high pressure unregulated pump. The injection process should be accompanied by the retention of some hydraulic parameters at constant level during some time. Various variants for use of mechatronic nodes for automatization of water injection process are considered. Scheme for reducing the load on the pump and equipment in hydraulic system and also for improving the quality control system with high accuracy is shown. Simulation results of injection process into the well at the pressure and consumption fixation and recommendations for the use of the proposed schemes depending on the technological process are given.
|Journal||IOP Conference Series: Materials Science and Engineering|
|Publication status||Published - 18 Apr 2017|
|Event||5th International Conference on Modern Technologies for Non-Destructive Testing - Tomsk, Russian Federation|
Duration: 3 Oct 2016 → 8 Oct 2016
ASJC Scopus subject areas
- Materials Science(all)