Influence of Wear Particles and Reverse Transfer of the Material on Wear Intensity of Aluminum Alloy under Dry Friction on Steel

N. M. Rusin, A. L. Skorentsev, I. V. Vlasov

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Abstract: Sintered Al-40Sn samples were subjected to tribological tests by the “pin-on-disk” scheme without liquid lubrication. A steel disk was pressed to the upper and lower face surfaces of a vertically located sample. It is revealed that the location of counterbodies relative to the frictional contact plane can significantly influence their wear intensity. These differences are explained by the different composition and structure of friction surfaces of counterbodies the nature of formation of which depends on the gravity vector direction defining the features of displacement of wear particles over the friction surface.

Original languageEnglish
Pages (from-to)396-403
Number of pages8
JournalJournal of Friction and Wear
Volume40
Issue number5
DOIs
Publication statusPublished - 1 Sep 2019
Externally publishedYes

Keywords

  • dry friction
  • self-lubricating aluminum alloy
  • wear intensity

ASJC Scopus subject areas

  • Mechanics of Materials
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'Influence of Wear Particles and Reverse Transfer of the Material on Wear Intensity of Aluminum Alloy under Dry Friction on Steel'. Together they form a unique fingerprint.

Cite this