Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V

I. V. Osetkovskiy, N. A. Kozyrev, A. I. Gusev, O. A. Kozyreva, R. A. Gizatulin, A. V. Valueva

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Studied the effect of the introduction of cobalt into the charge powder fused wire system Fe-C-Si-Mn-Cr-Ni-Mo-V, used in cladding assemblies and equipment parts and mechanisms operating under abrasive and abrasive shock loads., the samples cored wires were manufactured in the laboratory conditions using appropriate powder materials and as a carbonfluoride contained material were used the dust from gas purification of aluminum production.

Original languageEnglish
Title of host publicationMaterials and their Application - ICMA 2016
EditorsNikita V. Martyushev, Denis V. Valuev
PublisherTrans Tech Publications Ltd
Pages63-67
Number of pages5
ISBN (Print)9783035711790
DOIs
Publication statusPublished - 1 Jan 2017
EventInternational Conference on Materials and their Application, ICMA 2016 - Yurga, Russian Federation
Duration: 15 Dec 201616 Dec 2016

Publication series

NameKey Engineering Materials
Volume736 KEM
ISSN (Print)1013-9826

Conference

ConferenceInternational Conference on Materials and their Application, ICMA 2016
CountryRussian Federation
CityYurga
Period15.12.1616.12.16

Fingerprint

Cobalt
Abrasives
Powders
Wire
Fluxes
Gas fuel purification
Aluminum
Dust

Keywords

  • Abrasive shock loads
  • Dependencies
  • Hardness
  • Multivariate analysis
  • Non-metalic inclusions
  • Recovering
  • Surfacing
  • Wear resistance
  • Wire

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Osetkovskiy, I. V., Kozyrev, N. A., Gusev, A. I., Kozyreva, O. A., Gizatulin, R. A., & Valueva, A. V. (2017). Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V. In N. V. Martyushev, & D. V. Valuev (Eds.), Materials and their Application - ICMA 2016 (pp. 63-67). (Key Engineering Materials; Vol. 736 KEM). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.736.63

Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V. / Osetkovskiy, I. V.; Kozyrev, N. A.; Gusev, A. I.; Kozyreva, O. A.; Gizatulin, R. A.; Valueva, A. V.

Materials and their Application - ICMA 2016. ed. / Nikita V. Martyushev; Denis V. Valuev. Trans Tech Publications Ltd, 2017. p. 63-67 (Key Engineering Materials; Vol. 736 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Osetkovskiy, IV, Kozyrev, NA, Gusev, AI, Kozyreva, OA, Gizatulin, RA & Valueva, AV 2017, Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V. in NV Martyushev & DV Valuev (eds), Materials and their Application - ICMA 2016. Key Engineering Materials, vol. 736 KEM, Trans Tech Publications Ltd, pp. 63-67, International Conference on Materials and their Application, ICMA 2016, Yurga, Russian Federation, 15.12.16. https://doi.org/10.4028/www.scientific.net/KEM.736.63
Osetkovskiy IV, Kozyrev NA, Gusev AI, Kozyreva OA, Gizatulin RA, Valueva AV. Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V. In Martyushev NV, Valuev DV, editors, Materials and their Application - ICMA 2016. Trans Tech Publications Ltd. 2017. p. 63-67. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.736.63
Osetkovskiy, I. V. ; Kozyrev, N. A. ; Gusev, A. I. ; Kozyreva, O. A. ; Gizatulin, R. A. ; Valueva, A. V. / Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V. Materials and their Application - ICMA 2016. editor / Nikita V. Martyushev ; Denis V. Valuev. Trans Tech Publications Ltd, 2017. pp. 63-67 (Key Engineering Materials).
@inproceedings{bf73dc2fd8ee4fb7ab6307b41da15848,
title = "Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V",
abstract = "Studied the effect of the introduction of cobalt into the charge powder fused wire system Fe-C-Si-Mn-Cr-Ni-Mo-V, used in cladding assemblies and equipment parts and mechanisms operating under abrasive and abrasive shock loads., the samples cored wires were manufactured in the laboratory conditions using appropriate powder materials and as a carbonfluoride contained material were used the dust from gas purification of aluminum production.",
keywords = "Abrasive shock loads, Dependencies, Hardness, Multivariate analysis, Non-metalic inclusions, Recovering, Surfacing, Wear resistance, Wire",
author = "Osetkovskiy, {I. V.} and Kozyrev, {N. A.} and Gusev, {A. I.} and Kozyreva, {O. A.} and Gizatulin, {R. A.} and Valueva, {A. V.}",
year = "2017",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/KEM.736.63",
language = "English",
isbn = "9783035711790",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "63--67",
editor = "Martyushev, {Nikita V.} and Valuev, {Denis V.}",
booktitle = "Materials and their Application - ICMA 2016",

}

TY - GEN

T1 - Influence of the cobalt additive on the flux cored wire of system Fe-C-Si-Mn-Cr-Ni-Mo-V

AU - Osetkovskiy, I. V.

AU - Kozyrev, N. A.

AU - Gusev, A. I.

AU - Kozyreva, O. A.

AU - Gizatulin, R. A.

AU - Valueva, A. V.

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Studied the effect of the introduction of cobalt into the charge powder fused wire system Fe-C-Si-Mn-Cr-Ni-Mo-V, used in cladding assemblies and equipment parts and mechanisms operating under abrasive and abrasive shock loads., the samples cored wires were manufactured in the laboratory conditions using appropriate powder materials and as a carbonfluoride contained material were used the dust from gas purification of aluminum production.

AB - Studied the effect of the introduction of cobalt into the charge powder fused wire system Fe-C-Si-Mn-Cr-Ni-Mo-V, used in cladding assemblies and equipment parts and mechanisms operating under abrasive and abrasive shock loads., the samples cored wires were manufactured in the laboratory conditions using appropriate powder materials and as a carbonfluoride contained material were used the dust from gas purification of aluminum production.

KW - Abrasive shock loads

KW - Dependencies

KW - Hardness

KW - Multivariate analysis

KW - Non-metalic inclusions

KW - Recovering

KW - Surfacing

KW - Wear resistance

KW - Wire

UR - http://www.scopus.com/inward/record.url?scp=85021113414&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85021113414&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.736.63

DO - 10.4028/www.scientific.net/KEM.736.63

M3 - Conference contribution

SN - 9783035711790

T3 - Key Engineering Materials

SP - 63

EP - 67

BT - Materials and their Application - ICMA 2016

A2 - Martyushev, Nikita V.

A2 - Valuev, Denis V.

PB - Trans Tech Publications Ltd

ER -