Influence of optical properties of the shield on the laser heating of the treated material

Anna G. Knyazeva, Valery N. Demidov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The influence of thin plate prevented the projection of particles under laser heating is analyzed analytically and numerically. It was shown that the conjugate heat exchange between different materials changes not only absorbed heat quality during the heating but affect the kind of the dependence for the temperature on time. Temperature distribution for different time moments is illustrated for two particular cases. Half-transparent plate and half-transparent heated material are discussed. The results are useful to understand the physical phenomena in additive manufacturing.

Original languageEnglish
Title of host publicationProceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Print)9781467381147
DOIs
Publication statusPublished - 19 Feb 2016
EventInternational Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015 - Tomsk, Russian Federation
Duration: 1 Dec 20154 Dec 2015

Other

OtherInternational Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015
CountryRussian Federation
CityTomsk
Period1.12.154.12.15

Fingerprint

Laser heating
Optical Properties
Heating
3D printers
Optical properties
Heat
Laser
Thin Plate
Temperature Distribution
Temperature distribution
Manufacturing
Projection
Moment
Temperature
Influence
Hot Temperature

Keywords

  • analytical estimations
  • conjugate heat exchange
  • laser heating
  • numerical examples
  • temperature distribution

ASJC Scopus subject areas

  • Mechanical Engineering
  • Modelling and Simulation
  • Control and Systems Engineering

Cite this

Knyazeva, A. G., & Demidov, V. N. (2016). Influence of optical properties of the shield on the laser heating of the treated material. In Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015 [7414884] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/MEACS.2015.7414884

Influence of optical properties of the shield on the laser heating of the treated material. / Knyazeva, Anna G.; Demidov, Valery N.

Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. Institute of Electrical and Electronics Engineers Inc., 2016. 7414884.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Knyazeva, AG & Demidov, VN 2016, Influence of optical properties of the shield on the laser heating of the treated material. in Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015., 7414884, Institute of Electrical and Electronics Engineers Inc., International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015, Tomsk, Russian Federation, 1.12.15. https://doi.org/10.1109/MEACS.2015.7414884
Knyazeva AG, Demidov VN. Influence of optical properties of the shield on the laser heating of the treated material. In Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. Institute of Electrical and Electronics Engineers Inc. 2016. 7414884 https://doi.org/10.1109/MEACS.2015.7414884
Knyazeva, Anna G. ; Demidov, Valery N. / Influence of optical properties of the shield on the laser heating of the treated material. Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. Institute of Electrical and Electronics Engineers Inc., 2016.
@inproceedings{a2d97fcb63a64731af826a7b1b6d352e,
title = "Influence of optical properties of the shield on the laser heating of the treated material",
abstract = "The influence of thin plate prevented the projection of particles under laser heating is analyzed analytically and numerically. It was shown that the conjugate heat exchange between different materials changes not only absorbed heat quality during the heating but affect the kind of the dependence for the temperature on time. Temperature distribution for different time moments is illustrated for two particular cases. Half-transparent plate and half-transparent heated material are discussed. The results are useful to understand the physical phenomena in additive manufacturing.",
keywords = "analytical estimations, conjugate heat exchange, laser heating, numerical examples, temperature distribution",
author = "Knyazeva, {Anna G.} and Demidov, {Valery N.}",
year = "2016",
month = "2",
day = "19",
doi = "10.1109/MEACS.2015.7414884",
language = "English",
isbn = "9781467381147",
booktitle = "Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - Influence of optical properties of the shield on the laser heating of the treated material

AU - Knyazeva, Anna G.

AU - Demidov, Valery N.

PY - 2016/2/19

Y1 - 2016/2/19

N2 - The influence of thin plate prevented the projection of particles under laser heating is analyzed analytically and numerically. It was shown that the conjugate heat exchange between different materials changes not only absorbed heat quality during the heating but affect the kind of the dependence for the temperature on time. Temperature distribution for different time moments is illustrated for two particular cases. Half-transparent plate and half-transparent heated material are discussed. The results are useful to understand the physical phenomena in additive manufacturing.

AB - The influence of thin plate prevented the projection of particles under laser heating is analyzed analytically and numerically. It was shown that the conjugate heat exchange between different materials changes not only absorbed heat quality during the heating but affect the kind of the dependence for the temperature on time. Temperature distribution for different time moments is illustrated for two particular cases. Half-transparent plate and half-transparent heated material are discussed. The results are useful to understand the physical phenomena in additive manufacturing.

KW - analytical estimations

KW - conjugate heat exchange

KW - laser heating

KW - numerical examples

KW - temperature distribution

UR - http://www.scopus.com/inward/record.url?scp=84963853559&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84963853559&partnerID=8YFLogxK

U2 - 10.1109/MEACS.2015.7414884

DO - 10.1109/MEACS.2015.7414884

M3 - Conference contribution

AN - SCOPUS:84963853559

SN - 9781467381147

BT - Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015

PB - Institute of Electrical and Electronics Engineers Inc.

ER -