Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene

S. V. Panin, L. A. Kornienko, D. G. Buslovich, V. O. Alexenko, L. R. Ivanova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

To determine the limits of the operation loading intervals appropriate for the use of solid lubricant UHMWPE composites in tribounits for mechanical engineering and medicine, the tribotechnical properties of UHMWPE blends with the optimum solid lubricant filler content (polytetrafluoroethylene, calcium stearate, molybdenum disulfide, colloidal graphite, boron nitride) are studied under dry sliding friction at different velocities (V = 0.3 and 0.5 m/s) and loads (P = 60 and 140 N). It is shown that the wear resistance of solid lubricant UHMWPE composites at moderate sliding velocities (V = 0.3 m/s) and loads (P = 60 N) increases 2-3 times in comparison with pure UHMWPE, while at high load P = 140 N wear resistance of both neat UHMWPE and its composites is reduced almost twice. At high sliding velocities and loads (up to P = 140 N), multiple increasing of the wear of pure UHMWPE and its composites takes place (by the factor of 5 to 10). The operational conditions of UHMWPE composites in tribounits in engineering and medicine are discussed.

Original languageEnglish
Title of host publicationMechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017
Subtitle of host publicationProceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures
PublisherAmerican Institute of Physics Inc.
Volume1915
ISBN (Electronic)9780735416079
DOIs
Publication statusPublished - 12 Dec 2017
Event11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017 - Ekaterinburg, Russian Federation
Duration: 11 Dec 201715 Dec 2017

Conference

Conference11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017
CountryRussian Federation
CityEkaterinburg
Period11.12.1715.12.17

Fingerprint

solid lubricants
wear resistance
sliding
polyethylenes
molecular weight
composite materials
medicine
loading operations
molybdenum disulfides
dry friction
sliding friction
mechanical engineering
stearates
polytetrafluoroethylene
boron nitrides
fillers
calcium
graphite
engineering
intervals

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Panin, S. V., Kornienko, L. A., Buslovich, D. G., Alexenko, V. O., & Ivanova, L. R. (2017). Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene. In Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures (Vol. 1915). [030017] American Institute of Physics Inc.. https://doi.org/10.1063/1.5017337

Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene. / Panin, S. V.; Kornienko, L. A.; Buslovich, D. G.; Alexenko, V. O.; Ivanova, L. R.

Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915 American Institute of Physics Inc., 2017. 030017.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Panin, SV, Kornienko, LA, Buslovich, DG, Alexenko, VO & Ivanova, LR 2017, Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene. in Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. vol. 1915, 030017, American Institute of Physics Inc., 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017, Ekaterinburg, Russian Federation, 11.12.17. https://doi.org/10.1063/1.5017337
Panin SV, Kornienko LA, Buslovich DG, Alexenko VO, Ivanova LR. Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene. In Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915. American Institute of Physics Inc. 2017. 030017 https://doi.org/10.1063/1.5017337
Panin, S. V. ; Kornienko, L. A. ; Buslovich, D. G. ; Alexenko, V. O. ; Ivanova, L. R. / Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene. Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915 American Institute of Physics Inc., 2017.
@inproceedings{8cf3c847f52949c68aae04d878d97718,
title = "Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene",
abstract = "To determine the limits of the operation loading intervals appropriate for the use of solid lubricant UHMWPE composites in tribounits for mechanical engineering and medicine, the tribotechnical properties of UHMWPE blends with the optimum solid lubricant filler content (polytetrafluoroethylene, calcium stearate, molybdenum disulfide, colloidal graphite, boron nitride) are studied under dry sliding friction at different velocities (V = 0.3 and 0.5 m/s) and loads (P = 60 and 140 N). It is shown that the wear resistance of solid lubricant UHMWPE composites at moderate sliding velocities (V = 0.3 m/s) and loads (P = 60 N) increases 2-3 times in comparison with pure UHMWPE, while at high load P = 140 N wear resistance of both neat UHMWPE and its composites is reduced almost twice. At high sliding velocities and loads (up to P = 140 N), multiple increasing of the wear of pure UHMWPE and its composites takes place (by the factor of 5 to 10). The operational conditions of UHMWPE composites in tribounits in engineering and medicine are discussed.",
author = "Panin, {S. V.} and Kornienko, {L. A.} and Buslovich, {D. G.} and Alexenko, {V. O.} and Ivanova, {L. R.}",
year = "2017",
month = "12",
day = "12",
doi = "10.1063/1.5017337",
language = "English",
volume = "1915",
booktitle = "Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Influence of load and sliding velocity on wear resistance of solid-lubricant composites of ultra-high molecular weight polyethylene

AU - Panin, S. V.

AU - Kornienko, L. A.

AU - Buslovich, D. G.

AU - Alexenko, V. O.

AU - Ivanova, L. R.

PY - 2017/12/12

Y1 - 2017/12/12

N2 - To determine the limits of the operation loading intervals appropriate for the use of solid lubricant UHMWPE composites in tribounits for mechanical engineering and medicine, the tribotechnical properties of UHMWPE blends with the optimum solid lubricant filler content (polytetrafluoroethylene, calcium stearate, molybdenum disulfide, colloidal graphite, boron nitride) are studied under dry sliding friction at different velocities (V = 0.3 and 0.5 m/s) and loads (P = 60 and 140 N). It is shown that the wear resistance of solid lubricant UHMWPE composites at moderate sliding velocities (V = 0.3 m/s) and loads (P = 60 N) increases 2-3 times in comparison with pure UHMWPE, while at high load P = 140 N wear resistance of both neat UHMWPE and its composites is reduced almost twice. At high sliding velocities and loads (up to P = 140 N), multiple increasing of the wear of pure UHMWPE and its composites takes place (by the factor of 5 to 10). The operational conditions of UHMWPE composites in tribounits in engineering and medicine are discussed.

AB - To determine the limits of the operation loading intervals appropriate for the use of solid lubricant UHMWPE composites in tribounits for mechanical engineering and medicine, the tribotechnical properties of UHMWPE blends with the optimum solid lubricant filler content (polytetrafluoroethylene, calcium stearate, molybdenum disulfide, colloidal graphite, boron nitride) are studied under dry sliding friction at different velocities (V = 0.3 and 0.5 m/s) and loads (P = 60 and 140 N). It is shown that the wear resistance of solid lubricant UHMWPE composites at moderate sliding velocities (V = 0.3 m/s) and loads (P = 60 N) increases 2-3 times in comparison with pure UHMWPE, while at high load P = 140 N wear resistance of both neat UHMWPE and its composites is reduced almost twice. At high sliding velocities and loads (up to P = 140 N), multiple increasing of the wear of pure UHMWPE and its composites takes place (by the factor of 5 to 10). The operational conditions of UHMWPE composites in tribounits in engineering and medicine are discussed.

UR - http://www.scopus.com/inward/record.url?scp=85038890553&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85038890553&partnerID=8YFLogxK

U2 - 10.1063/1.5017337

DO - 10.1063/1.5017337

M3 - Conference contribution

VL - 1915

BT - Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017

PB - American Institute of Physics Inc.

ER -