Influence of layer-by-layer laser sintering conditions on the quality of sintered surface layer of products

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Abstract

The influence of technological modes of sintering: the displacement velocity of laser beam V, laser power P, scanning step S and preheating temperature of powder material t on the quality of sintered surface layer of aluminum powder PA-4, copper powder PMS-1 and cobalt- chromium-molybdenum powder DSK-F75 were studied.

Original languageEnglish
Title of host publicationIOP Conference Series: Materials Science and Engineering
PublisherInstitute of Physics Publishing
Volume91
Edition1
DOIs
Publication statusPublished - 14 Sep 2015
Event6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering - Yurga, Russian Federation
Duration: 21 May 201523 May 2015

Other

Other6th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering
CountryRussian Federation
CityYurga
Period21.5.1523.5.15

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Fingerprint Dive into the research topics of 'Influence of layer-by-layer laser sintering conditions on the quality of sintered surface layer of products'. Together they form a unique fingerprint.

  • Cite this

    Saprykina, N. A., Saprykin, A. A., Borovikov, I. F., & Sharkeev, Y. P. (2015). Influence of layer-by-layer laser sintering conditions on the quality of sintered surface layer of products. In IOP Conference Series: Materials Science and Engineering (1 ed., Vol. 91). [012031] Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/91/1/012031