Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance

Dmitriy V. Shiyanov, Gennadiy S. Evtushenko, Viktor B. Sukhanov, Valery F. Fedorov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Dependence of a CuBr laser output on the pressure of H2- and HBr- additives into active medium has been investigated. Optimal H2 and HBr densities for maximal laser output have been determined when pressure of Ne buffer gas was varied in the range from 10 up to 100 torr. Laser output has been studied with variation of the active compound (CuBr) pressure in the range from 0.1 up to 0.6 torr for gas discharge tubes of different volumes. The optimal additive pressure has been shown to linearly depend on a voltage across gas discharge tube at high pressure of the buffer gas. The optimal density of copper bromide decreases while pulse repetition rate increases up to 100 kHz. It is assumed that accumulating of Cu-atoms takes place in the active medium due to decreasing of interpulse period.

Original languageEnglish
Title of host publicationProceedings of SPIE - The International Society for Optical Engineering
Volume6263
DOIs
Publication statusPublished - 2006
EventAtomic and Molecular Pulsed Lasers VI - Tomsk, Russian Federation
Duration: 12 Sep 200516 Sep 2005

Other

OtherAtomic and Molecular Pulsed Lasers VI
CountryRussian Federation
CityTomsk
Period12.9.0516.9.05

Fingerprint

Gas mixtures
gas mixtures
pumping
laser outputs
Vapors
vapors
gas discharge tubes
Lasers
Gas discharge tubes
lasers
buffers
pulse repetition rate
Pulse repetition rate
gases
bromides
Gases
copper
electric potential
Copper
Atoms

Keywords

  • And additives
  • Copper bromide vapor laser (CuBrVL)
  • Copper vapor laser (CVL)
  • Gas discharge tube (GDT)
  • Lasing
  • Output parameters
  • Pulse repetition frequency (PRF)

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Condensed Matter Physics

Cite this

Shiyanov, D. V., Evtushenko, G. S., Sukhanov, V. B., & Fedorov, V. F. (2006). Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance. In Proceedings of SPIE - The International Society for Optical Engineering (Vol. 6263). [62630C] https://doi.org/10.1117/12.677396

Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance. / Shiyanov, Dmitriy V.; Evtushenko, Gennadiy S.; Sukhanov, Viktor B.; Fedorov, Valery F.

Proceedings of SPIE - The International Society for Optical Engineering. Vol. 6263 2006. 62630C.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shiyanov, DV, Evtushenko, GS, Sukhanov, VB & Fedorov, VF 2006, Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance. in Proceedings of SPIE - The International Society for Optical Engineering. vol. 6263, 62630C, Atomic and Molecular Pulsed Lasers VI, Tomsk, Russian Federation, 12.9.05. https://doi.org/10.1117/12.677396
Shiyanov DV, Evtushenko GS, Sukhanov VB, Fedorov VF. Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance. In Proceedings of SPIE - The International Society for Optical Engineering. Vol. 6263. 2006. 62630C https://doi.org/10.1117/12.677396
Shiyanov, Dmitriy V. ; Evtushenko, Gennadiy S. ; Sukhanov, Viktor B. ; Fedorov, Valery F. / Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance. Proceedings of SPIE - The International Society for Optical Engineering. Vol. 6263 2006.
@inproceedings{e9239ec6846945aebfe7e9da18ccbbcc,
title = "Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance",
abstract = "Dependence of a CuBr laser output on the pressure of H2- and HBr- additives into active medium has been investigated. Optimal H2 and HBr densities for maximal laser output have been determined when pressure of Ne buffer gas was varied in the range from 10 up to 100 torr. Laser output has been studied with variation of the active compound (CuBr) pressure in the range from 0.1 up to 0.6 torr for gas discharge tubes of different volumes. The optimal additive pressure has been shown to linearly depend on a voltage across gas discharge tube at high pressure of the buffer gas. The optimal density of copper bromide decreases while pulse repetition rate increases up to 100 kHz. It is assumed that accumulating of Cu-atoms takes place in the active medium due to decreasing of interpulse period.",
keywords = "And additives, Copper bromide vapor laser (CuBrVL), Copper vapor laser (CVL), Gas discharge tube (GDT), Lasing, Output parameters, Pulse repetition frequency (PRF)",
author = "Shiyanov, {Dmitriy V.} and Evtushenko, {Gennadiy S.} and Sukhanov, {Viktor B.} and Fedorov, {Valery F.}",
year = "2006",
doi = "10.1117/12.677396",
language = "English",
isbn = "0819463280",
volume = "6263",
booktitle = "Proceedings of SPIE - The International Society for Optical Engineering",

}

TY - GEN

T1 - Influence of gas mixture content and pumping conditions on CuBr+Ne+H 2 (HBr) vapor lasers performance

AU - Shiyanov, Dmitriy V.

AU - Evtushenko, Gennadiy S.

AU - Sukhanov, Viktor B.

AU - Fedorov, Valery F.

PY - 2006

Y1 - 2006

N2 - Dependence of a CuBr laser output on the pressure of H2- and HBr- additives into active medium has been investigated. Optimal H2 and HBr densities for maximal laser output have been determined when pressure of Ne buffer gas was varied in the range from 10 up to 100 torr. Laser output has been studied with variation of the active compound (CuBr) pressure in the range from 0.1 up to 0.6 torr for gas discharge tubes of different volumes. The optimal additive pressure has been shown to linearly depend on a voltage across gas discharge tube at high pressure of the buffer gas. The optimal density of copper bromide decreases while pulse repetition rate increases up to 100 kHz. It is assumed that accumulating of Cu-atoms takes place in the active medium due to decreasing of interpulse period.

AB - Dependence of a CuBr laser output on the pressure of H2- and HBr- additives into active medium has been investigated. Optimal H2 and HBr densities for maximal laser output have been determined when pressure of Ne buffer gas was varied in the range from 10 up to 100 torr. Laser output has been studied with variation of the active compound (CuBr) pressure in the range from 0.1 up to 0.6 torr for gas discharge tubes of different volumes. The optimal additive pressure has been shown to linearly depend on a voltage across gas discharge tube at high pressure of the buffer gas. The optimal density of copper bromide decreases while pulse repetition rate increases up to 100 kHz. It is assumed that accumulating of Cu-atoms takes place in the active medium due to decreasing of interpulse period.

KW - And additives

KW - Copper bromide vapor laser (CuBrVL)

KW - Copper vapor laser (CVL)

KW - Gas discharge tube (GDT)

KW - Lasing

KW - Output parameters

KW - Pulse repetition frequency (PRF)

UR - http://www.scopus.com/inward/record.url?scp=33746104119&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33746104119&partnerID=8YFLogxK

U2 - 10.1117/12.677396

DO - 10.1117/12.677396

M3 - Conference contribution

SN - 0819463280

SN - 9780819463289

VL - 6263

BT - Proceedings of SPIE - The International Society for Optical Engineering

ER -