Increase of firmness of the metall-cutting tool on the basis of removal of internal tension in replaceable cutting insert

R. S. Chuykov, A. A. Mokhovikov, S. S. Chuykov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Results of research of types of the destruction caused by existence of internal tension in a tool firm alloy at production of the replaceable many-sided plates (RMSP) which can be removed by preliminary heating of cutting plates prior to cutting process are given in work. The new technical solution on realization of a method of preliminary heating of SMP is developed for removal of internal tension in the tool firm alloys (TFA), and also the special design of the metal-cutting tool is developed for increase of operability of hard-alloy SMP with preliminary heating.

Original languageEnglish
Title of host publicationApplied Mechanics and Materials
PublisherTrans Tech Publications Ltd
Pages510-514
Number of pages5
Volume682
ISBN (Print)9783038352815
DOIs
Publication statusPublished - 2014
Event5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014 - Yurga, Russian Federation
Duration: 22 May 201423 May 2014

Publication series

NameApplied Mechanics and Materials
Volume682
ISSN (Print)16609336
ISSN (Electronic)16627482

Other

Other5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014
CountryRussian Federation
CityYurga
Period22.5.1423.5.14

Keywords

  • Combined tool
  • Internal tension
  • The tool with preliminary heating
  • Working capacity

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Increase of firmness of the metall-cutting tool on the basis of removal of internal tension in replaceable cutting insert'. Together they form a unique fingerprint.

  • Cite this

    Chuykov, R. S., Mokhovikov, A. A., & Chuykov, S. S. (2014). Increase of firmness of the metall-cutting tool on the basis of removal of internal tension in replaceable cutting insert. In Applied Mechanics and Materials (Vol. 682, pp. 510-514). (Applied Mechanics and Materials; Vol. 682). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.682.510