TY - GEN
T1 - Improving the tribological properties of self-lubricating Al-Sn alloys by their severe plastic processing
AU - Rusin, N. M.
AU - Skorentsev, A. L.
N1 - Copyright:
Copyright 2021 Elsevier B.V., All rights reserved.
PY - 2013
Y1 - 2013
N2 - The influence of equal channel angular pressing by route A on the structure and properties of sintered Al-40Sn alloys was investigated. It was founded that the microstructure of sintered alloys very strong correlated with the type of initial powders that, nevertheless, not affects on mechanical properties of sintered alloys. The sintered structure of alloys was transformed in the layered one, using the pressing. It results in the square of interphase boundaries enlarging that gives to Al-40Sn alloys some additional strengthening and wear resistance.
AB - The influence of equal channel angular pressing by route A on the structure and properties of sintered Al-40Sn alloys was investigated. It was founded that the microstructure of sintered alloys very strong correlated with the type of initial powders that, nevertheless, not affects on mechanical properties of sintered alloys. The sintered structure of alloys was transformed in the layered one, using the pressing. It results in the square of interphase boundaries enlarging that gives to Al-40Sn alloys some additional strengthening and wear resistance.
KW - Antifriction materials
KW - Dry friction
KW - Powder metallurgy
KW - Wear intensity
UR - http://www.scopus.com/inward/record.url?scp=84884775746&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84884775746&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/AMM.379.110
DO - 10.4028/www.scientific.net/AMM.379.110
M3 - Conference contribution
AN - SCOPUS:84884775746
SN - 9783037857991
T3 - Applied Mechanics and Materials
SP - 110
EP - 114
BT - Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises
PB - Trans Tech Publications Ltd
T2 - 4th International Scientific Practical Conference with Elements of School for Junior Scientists ("Innovative Technologies and Economics in Engineering")
Y2 - 23 May 2013 through 25 May 2013
ER -