Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Abstract

Mathematical relation between roughness of the surface layer of the sintered article and layer-by-layer laser sintering modes obtained from experiments conducted using copper powder material PMS-1. Authors suggest that split manufacturing process of an article and its inner part must be split to roughing, semi-finishing and finishing modes.

Original languageEnglish
Title of host publicationInnovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises
Pages56-59
Number of pages4
Volume379
DOIs
Publication statusPublished - 2013
Event4th International Scientific Practical Conference with Elements of School for Junior Scientists ("Innovative Technologies and Economics in Engineering") - Yurga, Russian Federation
Duration: 23 May 201325 May 2013

Publication series

NameApplied Mechanics and Materials
Volume379
ISSN (Print)16609336
ISSN (Electronic)16627482

Conference

Conference4th International Scientific Practical Conference with Elements of School for Junior Scientists ("Innovative Technologies and Economics in Engineering")
CountryRussian Federation
CityYurga
Period23.5.1325.5.13

Fingerprint

Sintering
Copper powder
Lasers
Laser modes
Surface roughness
Experiments

Keywords

  • Experimental setup
  • Layer-by-layer laser sintering
  • Sintering regimes
  • Surface layer quality

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Saprykina, N. A., & Saprykin, A. A. (2013). Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering. In Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises (Vol. 379, pp. 56-59). (Applied Mechanics and Materials; Vol. 379). https://doi.org/10.4028/www.scientific.net/AMM.379.56

Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering. / Saprykina, N. A.; Saprykin, Alexander Alexandrovich.

Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises. Vol. 379 2013. p. 56-59 (Applied Mechanics and Materials; Vol. 379).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Saprykina, NA & Saprykin, AA 2013, Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering. in Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises. vol. 379, Applied Mechanics and Materials, vol. 379, pp. 56-59, 4th International Scientific Practical Conference with Elements of School for Junior Scientists ("Innovative Technologies and Economics in Engineering"), Yurga, Russian Federation, 23.5.13. https://doi.org/10.4028/www.scientific.net/AMM.379.56
Saprykina NA, Saprykin AA. Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering. In Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises. Vol. 379. 2013. p. 56-59. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.379.56
Saprykina, N. A. ; Saprykin, Alexander Alexandrovich. / Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering. Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises. Vol. 379 2013. pp. 56-59 (Applied Mechanics and Materials).
@inproceedings{7f1444f5f89144ac9f9a84291537058c,
title = "Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering",
abstract = "Mathematical relation between roughness of the surface layer of the sintered article and layer-by-layer laser sintering modes obtained from experiments conducted using copper powder material PMS-1. Authors suggest that split manufacturing process of an article and its inner part must be split to roughing, semi-finishing and finishing modes.",
keywords = "Experimental setup, Layer-by-layer laser sintering, Sintering regimes, Surface layer quality",
author = "Saprykina, {N. A.} and Saprykin, {Alexander Alexandrovich}",
year = "2013",
doi = "10.4028/www.scientific.net/AMM.379.56",
language = "English",
isbn = "9783037857991",
volume = "379",
series = "Applied Mechanics and Materials",
pages = "56--59",
booktitle = "Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises",

}

TY - GEN

T1 - Improvement of surface layer formation technology for articles produced by layer-by-layer laser sintering

AU - Saprykina, N. A.

AU - Saprykin, Alexander Alexandrovich

PY - 2013

Y1 - 2013

N2 - Mathematical relation between roughness of the surface layer of the sintered article and layer-by-layer laser sintering modes obtained from experiments conducted using copper powder material PMS-1. Authors suggest that split manufacturing process of an article and its inner part must be split to roughing, semi-finishing and finishing modes.

AB - Mathematical relation between roughness of the surface layer of the sintered article and layer-by-layer laser sintering modes obtained from experiments conducted using copper powder material PMS-1. Authors suggest that split manufacturing process of an article and its inner part must be split to roughing, semi-finishing and finishing modes.

KW - Experimental setup

KW - Layer-by-layer laser sintering

KW - Sintering regimes

KW - Surface layer quality

UR - http://www.scopus.com/inward/record.url?scp=84884733670&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84884733670&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.379.56

DO - 10.4028/www.scientific.net/AMM.379.56

M3 - Conference contribution

AN - SCOPUS:84884733670

SN - 9783037857991

VL - 379

T3 - Applied Mechanics and Materials

SP - 56

EP - 59

BT - Innovation Materials and Manufacturing Technologies, Economic Aspects in Enterprises

ER -