Abstract
The designed scheme and algorithm for calculating the codes of rotational velocity and position angle of the motor shaft obtained by converting the harmonic signals from the rotor position sensor is described. The laboratory tests of the former main operation modes and analysis of the results were carried out. The experimental results are presented.
| Original language | English |
|---|---|
| Title of host publication | 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings |
| Publisher | Institute of Electrical and Electronics Engineers Inc. |
| ISBN (Electronic) | 9781467383837 |
| DOIs | |
| Publication status | Published - 14 Jun 2016 |
| Event | 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Moscow, Russian Federation Duration: 12 May 2016 → 14 May 2016 |
Publication series
| Name | 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings |
|---|
Conference
| Conference | 2016 International Siberian Conference on Control and Communications, SIBCON 2016 |
|---|---|
| Country | Russian Federation |
| City | Moscow |
| Period | 12.5.16 → 14.5.16 |
Fingerprint
Keywords
- digital electric drive
- former of rotation velocity code
- tangential conversion
ASJC Scopus subject areas
- Signal Processing
- Control and Systems Engineering
- Electrical and Electronic Engineering
- Modelling and Simulation
- Computer Networks and Communications
Cite this
High-precision former of velocity and motor shaft position angle codes. / Bolgov, I. S.; Dementiev, Y. N.
2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. 7491762 (2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - High-precision former of velocity and motor shaft position angle codes
AU - Bolgov, I. S.
AU - Dementiev, Y. N.
PY - 2016/6/14
Y1 - 2016/6/14
N2 - The designed scheme and algorithm for calculating the codes of rotational velocity and position angle of the motor shaft obtained by converting the harmonic signals from the rotor position sensor is described. The laboratory tests of the former main operation modes and analysis of the results were carried out. The experimental results are presented.
AB - The designed scheme and algorithm for calculating the codes of rotational velocity and position angle of the motor shaft obtained by converting the harmonic signals from the rotor position sensor is described. The laboratory tests of the former main operation modes and analysis of the results were carried out. The experimental results are presented.
KW - digital electric drive
KW - former of rotation velocity code
KW - tangential conversion
UR - http://www.scopus.com/inward/record.url?scp=84978033497&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84978033497&partnerID=8YFLogxK
U2 - 10.1109/SIBCON.2016.7491762
DO - 10.1109/SIBCON.2016.7491762
M3 - Conference contribution
AN - SCOPUS:84978033497
T3 - 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings
BT - 2016 International Siberian Conference on Control and Communications, SIBCON 2016 - Proceedings
PB - Institute of Electrical and Electronics Engineers Inc.
ER -