High energy effect in Li-Ti-Zn ferrite syntesis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Lithium-zinc-titanium ferrite synthesis under the high energy action, including mechanical activation of initial reagents mixture in a planetary mill and subsequent heating of reaction mixture by a high-energy electron beam, is investigated using x-ray diffraction and thermal analyzes. The composition of initial reagents mixture corresponds to lithium substituted ferrite formation with a stoichiometric spinel formula: Li<inf>0.65</inf>Fe<inf>1.6</inf>Ti<inf>0.5</inf>Zn<inf>0.2</inf>Mn<inf>0.05</inf>O<inf>4</inf>. The synthesized ferrites were examined by saturation magnetization and Curie temperature measurements. It was shown that the mechanical activation for 60 min and radiation-thermal heating at 800°C of the initial reagents mixture significantly increase the reactivity of solid phase systems, and thereby, decrease the temperature and time of synthesis, improving the homogeneity of the end product. The obtained lithium-titanium-zinc ferrites are characterized by the high values of both the specific magnetization and Curie temperature.

Original languageEnglish
Title of host publication2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Print)9781479971022
DOIs
Publication statusPublished - 1 Jul 2015
Event2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Omsk, Russian Federation
Duration: 21 May 201523 May 2015

Other

Other2015 International Siberian Conference on Control and Communications, SIBCON 2015
CountryRussian Federation
CityOmsk
Period21.5.1523.5.15

Fingerprint

Ferrite
Lithium
Ferrites
Curie temperature
Zinc
Titanium
Chemical activation
Heating
Heat radiation
Saturation magnetization
Temperature measurement
Electron beams
Magnetization
Diffraction
X rays
Chemical analysis
Temperature

Keywords

  • electron beam
  • lithium-titanium-zinc ferrite
  • mechanical activation
  • radiation-thermal heating
  • solid-state synthesis

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Control and Systems Engineering

Cite this

Vlasov, V. A., Lysenko, E. N., & Malyshev, A. V. (2015). High energy effect in Li-Ti-Zn ferrite syntesis. In 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings [7147020] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/SIBCON.2015.7147020

High energy effect in Li-Ti-Zn ferrite syntesis. / Vlasov, Vitaly A.; Lysenko, Elena N.; Malyshev, Andrey V.

2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015. 7147020.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vlasov, VA, Lysenko, EN & Malyshev, AV 2015, High energy effect in Li-Ti-Zn ferrite syntesis. in 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings., 7147020, Institute of Electrical and Electronics Engineers Inc., 2015 International Siberian Conference on Control and Communications, SIBCON 2015, Omsk, Russian Federation, 21.5.15. https://doi.org/10.1109/SIBCON.2015.7147020
Vlasov VA, Lysenko EN, Malyshev AV. High energy effect in Li-Ti-Zn ferrite syntesis. In 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2015. 7147020 https://doi.org/10.1109/SIBCON.2015.7147020
Vlasov, Vitaly A. ; Lysenko, Elena N. ; Malyshev, Andrey V. / High energy effect in Li-Ti-Zn ferrite syntesis. 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015.
@inproceedings{0a586abeda1b4676b7cb148d6c162568,
title = "High energy effect in Li-Ti-Zn ferrite syntesis",
abstract = "Lithium-zinc-titanium ferrite synthesis under the high energy action, including mechanical activation of initial reagents mixture in a planetary mill and subsequent heating of reaction mixture by a high-energy electron beam, is investigated using x-ray diffraction and thermal analyzes. The composition of initial reagents mixture corresponds to lithium substituted ferrite formation with a stoichiometric spinel formula: Li0.65Fe1.6Ti0.5Zn0.2Mn0.05O4. The synthesized ferrites were examined by saturation magnetization and Curie temperature measurements. It was shown that the mechanical activation for 60 min and radiation-thermal heating at 800°C of the initial reagents mixture significantly increase the reactivity of solid phase systems, and thereby, decrease the temperature and time of synthesis, improving the homogeneity of the end product. The obtained lithium-titanium-zinc ferrites are characterized by the high values of both the specific magnetization and Curie temperature.",
keywords = "electron beam, lithium-titanium-zinc ferrite, mechanical activation, radiation-thermal heating, solid-state synthesis",
author = "Vlasov, {Vitaly A.} and Lysenko, {Elena N.} and Malyshev, {Andrey V.}",
year = "2015",
month = "7",
day = "1",
doi = "10.1109/SIBCON.2015.7147020",
language = "English",
isbn = "9781479971022",
booktitle = "2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - GEN

T1 - High energy effect in Li-Ti-Zn ferrite syntesis

AU - Vlasov, Vitaly A.

AU - Lysenko, Elena N.

AU - Malyshev, Andrey V.

PY - 2015/7/1

Y1 - 2015/7/1

N2 - Lithium-zinc-titanium ferrite synthesis under the high energy action, including mechanical activation of initial reagents mixture in a planetary mill and subsequent heating of reaction mixture by a high-energy electron beam, is investigated using x-ray diffraction and thermal analyzes. The composition of initial reagents mixture corresponds to lithium substituted ferrite formation with a stoichiometric spinel formula: Li0.65Fe1.6Ti0.5Zn0.2Mn0.05O4. The synthesized ferrites were examined by saturation magnetization and Curie temperature measurements. It was shown that the mechanical activation for 60 min and radiation-thermal heating at 800°C of the initial reagents mixture significantly increase the reactivity of solid phase systems, and thereby, decrease the temperature and time of synthesis, improving the homogeneity of the end product. The obtained lithium-titanium-zinc ferrites are characterized by the high values of both the specific magnetization and Curie temperature.

AB - Lithium-zinc-titanium ferrite synthesis under the high energy action, including mechanical activation of initial reagents mixture in a planetary mill and subsequent heating of reaction mixture by a high-energy electron beam, is investigated using x-ray diffraction and thermal analyzes. The composition of initial reagents mixture corresponds to lithium substituted ferrite formation with a stoichiometric spinel formula: Li0.65Fe1.6Ti0.5Zn0.2Mn0.05O4. The synthesized ferrites were examined by saturation magnetization and Curie temperature measurements. It was shown that the mechanical activation for 60 min and radiation-thermal heating at 800°C of the initial reagents mixture significantly increase the reactivity of solid phase systems, and thereby, decrease the temperature and time of synthesis, improving the homogeneity of the end product. The obtained lithium-titanium-zinc ferrites are characterized by the high values of both the specific magnetization and Curie temperature.

KW - electron beam

KW - lithium-titanium-zinc ferrite

KW - mechanical activation

KW - radiation-thermal heating

KW - solid-state synthesis

UR - http://www.scopus.com/inward/record.url?scp=84941026188&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84941026188&partnerID=8YFLogxK

U2 - 10.1109/SIBCON.2015.7147020

DO - 10.1109/SIBCON.2015.7147020

M3 - Conference contribution

SN - 9781479971022

BT - 2015 International Siberian Conference on Control and Communications, SIBCON 2015 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

ER -