Abstract
In the paper the experimental results on investigation of combined process of hardening of hard alloy cutting tools using a pulsed high-power ion beam are presented. The basis of the process is the pretreatment of a surface of working section of a tool by the beam with the current density up to 300 A/cm 2 and the subsequent deposition of wear resistance coverings. This leads to the improvement of operational characteristics of the tools compared with coated tools.
| Original language | English |
|---|---|
| Title of host publication | 2000 13th International Conference on High-Power Particle Beams, BEAMS 2000 |
| Pages | 410-413 |
| Number of pages | 4 |
| Publication status | Published - 2000 |
| Event | 2000 13th International Conference on High-Power Particle Beams, BEAMS 2000 - Nagaoka, Japan Duration: 25 Jun 2000 → 30 Jun 2000 |
Other
| Other | 2000 13th International Conference on High-Power Particle Beams, BEAMS 2000 |
|---|---|
| Country | Japan |
| City | Nagaoka |
| Period | 25.6.00 → 30.6.00 |
Fingerprint
Keywords
- coating
- ion-beam
- treatment
ASJC Scopus subject areas
- Nuclear and High Energy Physics
Cite this
Hard alloy treatment affect by ion-focused beam on the process of wear-resistant coating. / Nesterenko, V. P.; Remnev, G. E.; Isakov, I. F.; Tarbokov, V. A.
2000 13th International Conference on High-Power Particle Beams, BEAMS 2000. 2000. p. 410-413 6220196.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Hard alloy treatment affect by ion-focused beam on the process of wear-resistant coating
AU - Nesterenko, V. P.
AU - Remnev, G. E.
AU - Isakov, I. F.
AU - Tarbokov, V. A.
PY - 2000
Y1 - 2000
N2 - In the paper the experimental results on investigation of combined process of hardening of hard alloy cutting tools using a pulsed high-power ion beam are presented. The basis of the process is the pretreatment of a surface of working section of a tool by the beam with the current density up to 300 A/cm 2 and the subsequent deposition of wear resistance coverings. This leads to the improvement of operational characteristics of the tools compared with coated tools.
AB - In the paper the experimental results on investigation of combined process of hardening of hard alloy cutting tools using a pulsed high-power ion beam are presented. The basis of the process is the pretreatment of a surface of working section of a tool by the beam with the current density up to 300 A/cm 2 and the subsequent deposition of wear resistance coverings. This leads to the improvement of operational characteristics of the tools compared with coated tools.
KW - coating
KW - ion-beam
KW - treatment
UR - http://www.scopus.com/inward/record.url?scp=84864552747&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84864552747&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84864552747
SP - 410
EP - 413
BT - 2000 13th International Conference on High-Power Particle Beams, BEAMS 2000
ER -