Generation and Analysis of Wire Rope Digital Radiographic Images

S. Chakhlov, P. Anpilogov, A. Batranin, S. Osipov, Sh Zhumabekova, I. Yadrenkin

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)


The paper is dealt with different structures of the digital radiographic system intended for wire rope radiography. The scanning geometry of the wire rope is presented and the main stages of its digital radiographic image generation are identified herein. Correction algorithms are suggested for X-ray beam hardening. A complex internal structure of the wire rope is illustrated by its 25 mm diameter image obtained from X-ray computed tomography. The paper considers the approach to the analysis of digital radiographic image algorithms based on the closeness of certain parameters (invariants) of all unit cross-sections of the reference wire rope or its sections with the length equaling to the lay. The main invariants of wire rope radiographic images are identified and compared with its typical defects.

Original languageEnglish
Article number012008
JournalIOP Conference Series: Materials Science and Engineering
Issue number1
Publication statusPublished - 15 Jun 2016
Event4th International Conference on Modern Technologies for Non-Destructive Testing - Tomsk, Russian Federation
Duration: 5 Oct 201510 Oct 2015

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Generation and Analysis of Wire Rope Digital Radiographic Images'. Together they form a unique fingerprint.

Cite this