Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane

S. V. Panin, L. A. Kornienko, Huang Qitao, V. O. Alexenko, L. R. Ivanova

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

To develop higher strength and wear-resistant polymer composites, which are based on ultra-high molecular weight polyethylene (UHMWPE), the mechanical and tribotechnical characteristics of UHMWPE filled with wollastonite microfibers and aluminum metahydroxide AlO(OH) microparticles, preliminarily treated (functionalized) in polyorganosiloxane to increase the adhesion of the fillers to the matrix, have been studied. The choice of the fillers and the adhesion promoter for the ultra-high molecular weight polyethylene matrix is determined by the search of effective commercially available fillers and surface modifiers to design wear resistant polymeric composites for friction units in mechanical engineering. The chemical and permolecular structure and the wear track surface topography of UHMWPE composites have been investigated under dry sliding friction at different loads and sliding velocities.

Original languageEnglish
Title of host publicationMechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017
Subtitle of host publicationProceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures
PublisherAmerican Institute of Physics Inc.
Volume1915
ISBN (Electronic)9780735416079
DOIs
Publication statusPublished - 12 Dec 2017
Event11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017 - Ekaterinburg, Russian Federation
Duration: 11 Dec 201715 Dec 2017

Conference

Conference11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017
CountryRussian Federation
CityEkaterinburg
Period11.12.1715.12.17

Fingerprint

polysiloxanes
polyethylenes
molecular weight
fillers
composite materials
adhesion
dry friction
microfibers
sliding friction
mechanical engineering
microparticles
matrices
high strength
sliding
topography
friction
aluminum
polymers

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Panin, S. V., Kornienko, L. A., Qitao, H., Alexenko, V. O., & Ivanova, L. R. (2017). Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane. In Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures (Vol. 1915). [030016] American Institute of Physics Inc.. https://doi.org/10.1063/1.5017336

Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane. / Panin, S. V.; Kornienko, L. A.; Qitao, Huang; Alexenko, V. O.; Ivanova, L. R.

Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915 American Institute of Physics Inc., 2017. 030016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Panin, SV, Kornienko, LA, Qitao, H, Alexenko, VO & Ivanova, LR 2017, Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane. in Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. vol. 1915, 030016, American Institute of Physics Inc., 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017, Ekaterinburg, Russian Federation, 11.12.17. https://doi.org/10.1063/1.5017336
Panin SV, Kornienko LA, Qitao H, Alexenko VO, Ivanova LR. Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane. In Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915. American Institute of Physics Inc. 2017. 030016 https://doi.org/10.1063/1.5017336
Panin, S. V. ; Kornienko, L. A. ; Qitao, Huang ; Alexenko, V. O. ; Ivanova, L. R. / Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane. Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915 American Institute of Physics Inc., 2017.
@inproceedings{c6a17df3a5e24e75a716cdcf9effeea3,
title = "Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane",
abstract = "To develop higher strength and wear-resistant polymer composites, which are based on ultra-high molecular weight polyethylene (UHMWPE), the mechanical and tribotechnical characteristics of UHMWPE filled with wollastonite microfibers and aluminum metahydroxide AlO(OH) microparticles, preliminarily treated (functionalized) in polyorganosiloxane to increase the adhesion of the fillers to the matrix, have been studied. The choice of the fillers and the adhesion promoter for the ultra-high molecular weight polyethylene matrix is determined by the search of effective commercially available fillers and surface modifiers to design wear resistant polymeric composites for friction units in mechanical engineering. The chemical and permolecular structure and the wear track surface topography of UHMWPE composites have been investigated under dry sliding friction at different loads and sliding velocities.",
author = "Panin, {S. V.} and Kornienko, {L. A.} and Huang Qitao and Alexenko, {V. O.} and Ivanova, {L. R.}",
year = "2017",
month = "12",
day = "12",
doi = "10.1063/1.5017336",
language = "English",
volume = "1915",
booktitle = "Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane

AU - Panin, S. V.

AU - Kornienko, L. A.

AU - Qitao, Huang

AU - Alexenko, V. O.

AU - Ivanova, L. R.

PY - 2017/12/12

Y1 - 2017/12/12

N2 - To develop higher strength and wear-resistant polymer composites, which are based on ultra-high molecular weight polyethylene (UHMWPE), the mechanical and tribotechnical characteristics of UHMWPE filled with wollastonite microfibers and aluminum metahydroxide AlO(OH) microparticles, preliminarily treated (functionalized) in polyorganosiloxane to increase the adhesion of the fillers to the matrix, have been studied. The choice of the fillers and the adhesion promoter for the ultra-high molecular weight polyethylene matrix is determined by the search of effective commercially available fillers and surface modifiers to design wear resistant polymeric composites for friction units in mechanical engineering. The chemical and permolecular structure and the wear track surface topography of UHMWPE composites have been investigated under dry sliding friction at different loads and sliding velocities.

AB - To develop higher strength and wear-resistant polymer composites, which are based on ultra-high molecular weight polyethylene (UHMWPE), the mechanical and tribotechnical characteristics of UHMWPE filled with wollastonite microfibers and aluminum metahydroxide AlO(OH) microparticles, preliminarily treated (functionalized) in polyorganosiloxane to increase the adhesion of the fillers to the matrix, have been studied. The choice of the fillers and the adhesion promoter for the ultra-high molecular weight polyethylene matrix is determined by the search of effective commercially available fillers and surface modifiers to design wear resistant polymeric composites for friction units in mechanical engineering. The chemical and permolecular structure and the wear track surface topography of UHMWPE composites have been investigated under dry sliding friction at different loads and sliding velocities.

UR - http://www.scopus.com/inward/record.url?scp=85038924385&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85038924385&partnerID=8YFLogxK

U2 - 10.1063/1.5017336

DO - 10.1063/1.5017336

M3 - Conference contribution

VL - 1915

BT - Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017

PB - American Institute of Physics Inc.

ER -