Friction stir processing on carbon steel

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Friction stir processing of medium carbon steel samples has been carried out using a milling machine and tools made of cemented tungsten carbide. Samples have been machined from 40 and 40X steels. The tools have been made in the shape of 5×5×1.5 mm and 3×3×1.5 mm tetrahedrons. The microstructure of stirred zone has been obtained using the smaller tool and consists of fine recrystallized 2-3 μm grains, whereas the larger tool has produced the "onion-like" structures comprising hard quenched "white" 500-600 MPa layers with 300-350 MPa interlayers of bainite needles. The mean values of wear intensity obtained after measuring the wear scar width were 0.02 mm/m and 0.001 mm/m for nonprocessed and processed samples, respectively.

Original languageEnglish
Title of host publicationAIP Conference Proceedings
PublisherAmerican Institute of Physics Inc.
Pages627-630
Number of pages4
Volume1623
ISBN (Electronic)9780735412606
DOIs
Publication statusPublished - 1 Jan 2014
EventInternational Conference on Physical Mesomechanics of Multilevel Systems 2014 - Tomsk, Russian Federation
Duration: 3 Sep 20145 Sep 2014

Conference

ConferenceInternational Conference on Physical Mesomechanics of Multilevel Systems 2014
CountryRussian Federation
CityTomsk
Period3.9.145.9.14

    Fingerprint

Keywords

  • Friction stir processing
  • Nanostructuring
  • Stirring
  • Thermomechanically affected zone

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Tarasov, SY., Melnikov, A. G., & Rubtsov, VE. (2014). Friction stir processing on carbon steel. In AIP Conference Proceedings (Vol. 1623, pp. 627-630). American Institute of Physics Inc.. https://doi.org/10.1063/1.4899023