Abstract
Former of turn trajectory of sliding valve shaft of gas line, that allows to provide desired motion trajectory of sliding valve and its full closing, is considered in that paper. Imitation model of that former, research results, which allow to detect influence of gain factor and time constant of position controller on value of speed error, that has impact on delay of output coordinate from setting, and that results to delay of sliding valve motion process to setting position point, are shown.
| Original language | English |
|---|---|
| Article number | 01038 |
| Journal | MATEC Web of Conferences |
| Volume | 91 |
| DOIs | |
| Publication status | Published - 20 Dec 2016 |
| Event | 4th International Youth Forum on Smart Grids 2016 - Tomsk, Russian Federation Duration: 10 Oct 2016 → 14 Oct 2016 |
Fingerprint
ASJC Scopus subject areas
- Chemistry(all)
- Materials Science(all)
- Engineering(all)
Cite this
Former of Turn Trajectory of Sliding Valve Shaft of Gas Line. / Dementyev, Vladislav Yu; Gusev, Nikolay V.; Koyain, Nikolay V.; Shiryaev, Sergey Yu.
In: MATEC Web of Conferences, Vol. 91, 01038, 20.12.2016.Research output: Contribution to journal › Conference article
}
TY - JOUR
T1 - Former of Turn Trajectory of Sliding Valve Shaft of Gas Line
AU - Dementyev, Vladislav Yu
AU - Gusev, Nikolay V.
AU - Koyain, Nikolay V.
AU - Shiryaev, Sergey Yu
PY - 2016/12/20
Y1 - 2016/12/20
N2 - Former of turn trajectory of sliding valve shaft of gas line, that allows to provide desired motion trajectory of sliding valve and its full closing, is considered in that paper. Imitation model of that former, research results, which allow to detect influence of gain factor and time constant of position controller on value of speed error, that has impact on delay of output coordinate from setting, and that results to delay of sliding valve motion process to setting position point, are shown.
AB - Former of turn trajectory of sliding valve shaft of gas line, that allows to provide desired motion trajectory of sliding valve and its full closing, is considered in that paper. Imitation model of that former, research results, which allow to detect influence of gain factor and time constant of position controller on value of speed error, that has impact on delay of output coordinate from setting, and that results to delay of sliding valve motion process to setting position point, are shown.
UR - http://www.scopus.com/inward/record.url?scp=85008692990&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85008692990&partnerID=8YFLogxK
U2 - 10.1051/matecconf/20179101038
DO - 10.1051/matecconf/20179101038
M3 - Conference article
AN - SCOPUS:85008692990
VL - 91
JO - MATEC Web of Conferences
JF - MATEC Web of Conferences
SN - 2261-236X
M1 - 01038
ER -