Formation of wear-resistant structures on solid alloy for superfinish processing

D. S. Rechenko, A. Y. Popov, B. P. Gritsenko, A. R. Sungatulin, Y. V. Titov, V. P. Sergeev, A. V. Voronov, K. A. Deev, V. A. Pupchin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Edge cutting machining of titanium alloy Ti64 is of great interest to science and practice because the alloy has high heat resistance, is widely used and difficult for processing. This work presents the results of Ti64 titanium alloy processing by carbide plate with coatings that have the initial edge about 1 μm. It is shown that the best result for resistance and quality of processing is demonstrated by plates with negative chamfer and coating.

Original languageEnglish
Title of host publicationAdvanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
PublisherAmerican Institute of Physics Inc.
Volume1783
ISBN (Electronic)9780735414457
DOIs
Publication statusPublished - 10 Nov 2016
EventInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 - Tomsk, Russian Federation
Duration: 19 Sep 201623 Sep 2016

Conference

ConferenceInternational Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016
CountryRussian Federation
CityTomsk
Period19.9.1623.9.16

Fingerprint

titanium alloys
coatings
thermal resistance
machining
carbides

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Rechenko, D. S., Popov, A. Y., Gritsenko, B. P., Sungatulin, A. R., Titov, Y. V., Sergeev, V. P., ... Pupchin, V. A. (2016). Formation of wear-resistant structures on solid alloy for superfinish processing. In Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016 (Vol. 1783). [020191] American Institute of Physics Inc.. https://doi.org/10.1063/1.4966485

Formation of wear-resistant structures on solid alloy for superfinish processing. / Rechenko, D. S.; Popov, A. Y.; Gritsenko, B. P.; Sungatulin, A. R.; Titov, Y. V.; Sergeev, V. P.; Voronov, A. V.; Deev, K. A.; Pupchin, V. A.

Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Vol. 1783 American Institute of Physics Inc., 2016. 020191.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rechenko, DS, Popov, AY, Gritsenko, BP, Sungatulin, AR, Titov, YV, Sergeev, VP, Voronov, AV, Deev, KA & Pupchin, VA 2016, Formation of wear-resistant structures on solid alloy for superfinish processing. in Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. vol. 1783, 020191, American Institute of Physics Inc., International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016, Tomsk, Russian Federation, 19.9.16. https://doi.org/10.1063/1.4966485
Rechenko DS, Popov AY, Gritsenko BP, Sungatulin AR, Titov YV, Sergeev VP et al. Formation of wear-resistant structures on solid alloy for superfinish processing. In Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Vol. 1783. American Institute of Physics Inc. 2016. 020191 https://doi.org/10.1063/1.4966485
Rechenko, D. S. ; Popov, A. Y. ; Gritsenko, B. P. ; Sungatulin, A. R. ; Titov, Y. V. ; Sergeev, V. P. ; Voronov, A. V. ; Deev, K. A. ; Pupchin, V. A. / Formation of wear-resistant structures on solid alloy for superfinish processing. Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016. Vol. 1783 American Institute of Physics Inc., 2016.
@inproceedings{2dd53ebab3cd4b6a909810c02e02ddfc,
title = "Formation of wear-resistant structures on solid alloy for superfinish processing",
abstract = "Edge cutting machining of titanium alloy Ti64 is of great interest to science and practice because the alloy has high heat resistance, is widely used and difficult for processing. This work presents the results of Ti64 titanium alloy processing by carbide plate with coatings that have the initial edge about 1 μm. It is shown that the best result for resistance and quality of processing is demonstrated by plates with negative chamfer and coating.",
author = "Rechenko, {D. S.} and Popov, {A. Y.} and Gritsenko, {B. P.} and Sungatulin, {A. R.} and Titov, {Y. V.} and Sergeev, {V. P.} and Voronov, {A. V.} and Deev, {K. A.} and Pupchin, {V. A.}",
year = "2016",
month = "11",
day = "10",
doi = "10.1063/1.4966485",
language = "English",
volume = "1783",
booktitle = "Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Formation of wear-resistant structures on solid alloy for superfinish processing

AU - Rechenko, D. S.

AU - Popov, A. Y.

AU - Gritsenko, B. P.

AU - Sungatulin, A. R.

AU - Titov, Y. V.

AU - Sergeev, V. P.

AU - Voronov, A. V.

AU - Deev, K. A.

AU - Pupchin, V. A.

PY - 2016/11/10

Y1 - 2016/11/10

N2 - Edge cutting machining of titanium alloy Ti64 is of great interest to science and practice because the alloy has high heat resistance, is widely used and difficult for processing. This work presents the results of Ti64 titanium alloy processing by carbide plate with coatings that have the initial edge about 1 μm. It is shown that the best result for resistance and quality of processing is demonstrated by plates with negative chamfer and coating.

AB - Edge cutting machining of titanium alloy Ti64 is of great interest to science and practice because the alloy has high heat resistance, is widely used and difficult for processing. This work presents the results of Ti64 titanium alloy processing by carbide plate with coatings that have the initial edge about 1 μm. It is shown that the best result for resistance and quality of processing is demonstrated by plates with negative chamfer and coating.

UR - http://www.scopus.com/inward/record.url?scp=85006049482&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85006049482&partnerID=8YFLogxK

U2 - 10.1063/1.4966485

DO - 10.1063/1.4966485

M3 - Conference contribution

AN - SCOPUS:85006049482

VL - 1783

BT - Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016: Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2016

PB - American Institute of Physics Inc.

ER -