Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Abstract

The paper presents results of research on a method of determining a geometric condition of a sintered surface using an instrumental digital microscope. The results of experimental studies of effects of laser irradiation technological modes on roughness of the cobalt chrome molybdenum powder DSK-F75 sintered layer are presented. Differentiation of modes of product surface and its internal volume formation into rough, semi-finishing and finishing are proposed.

Original languageEnglish
Title of host publicationInnovative Technologies and Economics in Engineering
PublisherTrans Tech Publications Ltd
Pages294-297
Number of pages4
Volume682
ISBN (Electronic)9783038352815, 9783038352815
DOIs
Publication statusPublished - 2014
Event5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014 - Yurga, Russian Federation
Duration: 22 May 201423 May 2014

Publication series

NameApplied Mechanics and Materials
Volume682
ISSN (Print)16609336
ISSN (Electronic)16627482

Conference

Conference5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014
CountryRussian Federation
CityYurga
Period22.5.1423.5.14

Fingerprint

Laser modes
Molybdenum
Cobalt
Sintering
Powders
Lasers
Laser beam effects
Microscopes
Surface roughness

Keywords

  • Experiment
  • Layer laser sintering
  • Sintered surface layer
  • Sintering conditions
  • Surface roughness

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Saprykina, N. A., Saprykin, A. A., & Matrunchik, M. S. (2014). Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes. In Innovative Technologies and Economics in Engineering (Vol. 682, pp. 294-297). (Applied Mechanics and Materials; Vol. 682). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.682.294

Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes. / Saprykina, N. A.; Saprykin, Alexander Alexandrovich; Matrunchik, M. S.

Innovative Technologies and Economics in Engineering. Vol. 682 Trans Tech Publications Ltd, 2014. p. 294-297 (Applied Mechanics and Materials; Vol. 682).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Saprykina, NA, Saprykin, AA & Matrunchik, MS 2014, Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes. in Innovative Technologies and Economics in Engineering. vol. 682, Applied Mechanics and Materials, vol. 682, Trans Tech Publications Ltd, pp. 294-297, 5th International Scientific Practical Conference on Innovative Technologies and Economics in Engineering, 2014, Yurga, Russian Federation, 22.5.14. https://doi.org/10.4028/www.scientific.net/AMM.682.294
Saprykina NA, Saprykin AA, Matrunchik MS. Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes. In Innovative Technologies and Economics in Engineering. Vol. 682. Trans Tech Publications Ltd. 2014. p. 294-297. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.682.294
Saprykina, N. A. ; Saprykin, Alexander Alexandrovich ; Matrunchik, M. S. / Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes. Innovative Technologies and Economics in Engineering. Vol. 682 Trans Tech Publications Ltd, 2014. pp. 294-297 (Applied Mechanics and Materials).
@inproceedings{267341c8574d4781ac42a259e570699e,
title = "Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes",
abstract = "The paper presents results of research on a method of determining a geometric condition of a sintered surface using an instrumental digital microscope. The results of experimental studies of effects of laser irradiation technological modes on roughness of the cobalt chrome molybdenum powder DSK-F75 sintered layer are presented. Differentiation of modes of product surface and its internal volume formation into rough, semi-finishing and finishing are proposed.",
keywords = "Experiment, Layer laser sintering, Sintered surface layer, Sintering conditions, Surface roughness",
author = "Saprykina, {N. A.} and Saprykin, {Alexander Alexandrovich} and Matrunchik, {M. S.}",
year = "2014",
doi = "10.4028/www.scientific.net/AMM.682.294",
language = "English",
volume = "682",
series = "Applied Mechanics and Materials",
publisher = "Trans Tech Publications Ltd",
pages = "294--297",
booktitle = "Innovative Technologies and Economics in Engineering",

}

TY - GEN

T1 - Formation of surface layer of cobalt chrome molybdenum powder products with differentiation of laser sintering modes

AU - Saprykina, N. A.

AU - Saprykin, Alexander Alexandrovich

AU - Matrunchik, M. S.

PY - 2014

Y1 - 2014

N2 - The paper presents results of research on a method of determining a geometric condition of a sintered surface using an instrumental digital microscope. The results of experimental studies of effects of laser irradiation technological modes on roughness of the cobalt chrome molybdenum powder DSK-F75 sintered layer are presented. Differentiation of modes of product surface and its internal volume formation into rough, semi-finishing and finishing are proposed.

AB - The paper presents results of research on a method of determining a geometric condition of a sintered surface using an instrumental digital microscope. The results of experimental studies of effects of laser irradiation technological modes on roughness of the cobalt chrome molybdenum powder DSK-F75 sintered layer are presented. Differentiation of modes of product surface and its internal volume formation into rough, semi-finishing and finishing are proposed.

KW - Experiment

KW - Layer laser sintering

KW - Sintered surface layer

KW - Sintering conditions

KW - Surface roughness

UR - http://www.scopus.com/inward/record.url?scp=84921874893&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84921874893&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.682.294

DO - 10.4028/www.scientific.net/AMM.682.294

M3 - Conference contribution

VL - 682

T3 - Applied Mechanics and Materials

SP - 294

EP - 297

BT - Innovative Technologies and Economics in Engineering

PB - Trans Tech Publications Ltd

ER -