Abstract
Thermal diffusivity measurements by using flash technique are widely known. Here we focus the attention onto the description of a new method to measure the wear resistance of cemented carbide cutting tools. Wear process is highly influenced by the temperature of cutting and the good correlation between diffusivity and resistance of tools in a wide range of cutting speed was found. It allows to forecast in a non-destructive way the wear resistance of each cutting insert in seria. Finally the method developed tends to reduce the operational time in mechanical processing.
| Original language | English |
|---|---|
| Title of host publication | Proceedings of SPIE - The International Society for Optical Engineering |
| Editors | Jan K. Eklund |
| Place of Publication | Bellingham, WA, United States |
| Publisher | Publ by Int Soc for Optical Engineering |
| Pages | 341-346 |
| Number of pages | 6 |
| Volume | 1682 |
| ISBN (Print) | 0819408433 |
| Publication status | Published - 1992 |
| Event | Thermosense XIV: An International Conf on Thermal Sensing and Imaging Diagnostic Applications - Orlando, FL, USA Duration: 22 Apr 1992 → 24 Apr 1992 |
Other
| Other | Thermosense XIV: An International Conf on Thermal Sensing and Imaging Diagnostic Applications |
|---|---|
| City | Orlando, FL, USA |
| Period | 22.4.92 → 24.4.92 |
Fingerprint
ASJC Scopus subject areas
- Electrical and Electronic Engineering
- Condensed Matter Physics
Cite this
Forecasting of tools' wear resistance by measurement of their thermal diffusivity. / Vavilov, Vladimir P.; Poletika, M. F.; Pushnyh, V. A.; Shipulin, A. V.; Reino, V. V.
Proceedings of SPIE - The International Society for Optical Engineering. ed. / Jan K. Eklund. Vol. 1682 Bellingham, WA, United States : Publ by Int Soc for Optical Engineering, 1992. p. 341-346.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
}
TY - GEN
T1 - Forecasting of tools' wear resistance by measurement of their thermal diffusivity
AU - Vavilov, Vladimir P.
AU - Poletika, M. F.
AU - Pushnyh, V. A.
AU - Shipulin, A. V.
AU - Reino, V. V.
PY - 1992
Y1 - 1992
N2 - Thermal diffusivity measurements by using flash technique are widely known. Here we focus the attention onto the description of a new method to measure the wear resistance of cemented carbide cutting tools. Wear process is highly influenced by the temperature of cutting and the good correlation between diffusivity and resistance of tools in a wide range of cutting speed was found. It allows to forecast in a non-destructive way the wear resistance of each cutting insert in seria. Finally the method developed tends to reduce the operational time in mechanical processing.
AB - Thermal diffusivity measurements by using flash technique are widely known. Here we focus the attention onto the description of a new method to measure the wear resistance of cemented carbide cutting tools. Wear process is highly influenced by the temperature of cutting and the good correlation between diffusivity and resistance of tools in a wide range of cutting speed was found. It allows to forecast in a non-destructive way the wear resistance of each cutting insert in seria. Finally the method developed tends to reduce the operational time in mechanical processing.
UR - http://www.scopus.com/inward/record.url?scp=0026627265&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0026627265&partnerID=8YFLogxK
M3 - Conference contribution
SN - 0819408433
VL - 1682
SP - 341
EP - 346
BT - Proceedings of SPIE - The International Society for Optical Engineering
A2 - Eklund, Jan K.
PB - Publ by Int Soc for Optical Engineering
CY - Bellingham, WA, United States
ER -