Field-assisted powder synthesis and consolidation of Fe-Ti-C metal-ceramic composites

Marya S. Yurlova, Aleksander N. Novoselov, Yen Shan Lin, Olga N. Sizonenko, Evgeny G. Grigoryev, Oleg L. Khasanov, Eugene A. Olevsky

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Fe, Ti powders, and their mixtures were subjected to electric discharges in a hydrocarbon liquid. During this treatment, the powder particles' refinement and carbide phase formation occurred. The obtained powder mixtures were consolidated by spark plasma sintering at 900°C for 5min under uniaxial pressure of 50-60MPa. The densification behavior, microstructure, phase composition, and mechanical properties of the processed powder samples were investigated. The obtained results indicate the final structure sensitivity to the powder chemical composition and to the regimes of the powder synthesis by the electric discharges. The developed fabrication approach represents a novel technological route for metal-ceramic powder composites' fabrication where the electromagnetic field assistance is employed at both powder synthesis and powder consolidation stages. Fe, Ti powders, and their mixtures are subjected to electric discharges in a hydrocarbon liquid. The obtained powder mixtures are consolidated by spark plasma sintering. The developed novel technological route uses electromagnetic field assistance at both powder synthesis and consolidation stages.

Original languageEnglish
Pages (from-to)785-791
Number of pages7
JournalAdvanced Engineering Materials
Volume16
Issue number6
DOIs
Publication statusPublished - 2014

Fingerprint

cermets
Cermets
consolidation
Consolidation
Powders
Composite materials
synthesis
Electric discharges
electric discharges
Spark plasma sintering
Hydrocarbons
sparks
Electromagnetic fields
sintering
electromagnetic fields
hydrocarbons
routes
Fabrication
fabrication
Liquids

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics

Cite this

Yurlova, M. S., Novoselov, A. N., Lin, Y. S., Sizonenko, O. N., Grigoryev, E. G., Khasanov, O. L., & Olevsky, E. A. (2014). Field-assisted powder synthesis and consolidation of Fe-Ti-C metal-ceramic composites. Advanced Engineering Materials, 16(6), 785-791. https://doi.org/10.1002/adem.201400105

Field-assisted powder synthesis and consolidation of Fe-Ti-C metal-ceramic composites. / Yurlova, Marya S.; Novoselov, Aleksander N.; Lin, Yen Shan; Sizonenko, Olga N.; Grigoryev, Evgeny G.; Khasanov, Oleg L.; Olevsky, Eugene A.

In: Advanced Engineering Materials, Vol. 16, No. 6, 2014, p. 785-791.

Research output: Contribution to journalArticle

Yurlova, MS, Novoselov, AN, Lin, YS, Sizonenko, ON, Grigoryev, EG, Khasanov, OL & Olevsky, EA 2014, 'Field-assisted powder synthesis and consolidation of Fe-Ti-C metal-ceramic composites', Advanced Engineering Materials, vol. 16, no. 6, pp. 785-791. https://doi.org/10.1002/adem.201400105
Yurlova, Marya S. ; Novoselov, Aleksander N. ; Lin, Yen Shan ; Sizonenko, Olga N. ; Grigoryev, Evgeny G. ; Khasanov, Oleg L. ; Olevsky, Eugene A. / Field-assisted powder synthesis and consolidation of Fe-Ti-C metal-ceramic composites. In: Advanced Engineering Materials. 2014 ; Vol. 16, No. 6. pp. 785-791.
@article{3b246207215345ad932680df5b08e600,
title = "Field-assisted powder synthesis and consolidation of Fe-Ti-C metal-ceramic composites",
abstract = "Fe, Ti powders, and their mixtures were subjected to electric discharges in a hydrocarbon liquid. During this treatment, the powder particles' refinement and carbide phase formation occurred. The obtained powder mixtures were consolidated by spark plasma sintering at 900°C for 5min under uniaxial pressure of 50-60MPa. The densification behavior, microstructure, phase composition, and mechanical properties of the processed powder samples were investigated. The obtained results indicate the final structure sensitivity to the powder chemical composition and to the regimes of the powder synthesis by the electric discharges. The developed fabrication approach represents a novel technological route for metal-ceramic powder composites' fabrication where the electromagnetic field assistance is employed at both powder synthesis and powder consolidation stages. Fe, Ti powders, and their mixtures are subjected to electric discharges in a hydrocarbon liquid. The obtained powder mixtures are consolidated by spark plasma sintering. The developed novel technological route uses electromagnetic field assistance at both powder synthesis and consolidation stages.",
author = "Yurlova, {Marya S.} and Novoselov, {Aleksander N.} and Lin, {Yen Shan} and Sizonenko, {Olga N.} and Grigoryev, {Evgeny G.} and Khasanov, {Oleg L.} and Olevsky, {Eugene A.}",
year = "2014",
doi = "10.1002/adem.201400105",
language = "English",
volume = "16",
pages = "785--791",
journal = "Advanced Engineering Materials",
issn = "1438-1656",
publisher = "Wiley-VCH Verlag",
number = "6",

}

TY - JOUR

T1 - Field-assisted powder synthesis and consolidation of Fe-Ti-C metal-ceramic composites

AU - Yurlova, Marya S.

AU - Novoselov, Aleksander N.

AU - Lin, Yen Shan

AU - Sizonenko, Olga N.

AU - Grigoryev, Evgeny G.

AU - Khasanov, Oleg L.

AU - Olevsky, Eugene A.

PY - 2014

Y1 - 2014

N2 - Fe, Ti powders, and their mixtures were subjected to electric discharges in a hydrocarbon liquid. During this treatment, the powder particles' refinement and carbide phase formation occurred. The obtained powder mixtures were consolidated by spark plasma sintering at 900°C for 5min under uniaxial pressure of 50-60MPa. The densification behavior, microstructure, phase composition, and mechanical properties of the processed powder samples were investigated. The obtained results indicate the final structure sensitivity to the powder chemical composition and to the regimes of the powder synthesis by the electric discharges. The developed fabrication approach represents a novel technological route for metal-ceramic powder composites' fabrication where the electromagnetic field assistance is employed at both powder synthesis and powder consolidation stages. Fe, Ti powders, and their mixtures are subjected to electric discharges in a hydrocarbon liquid. The obtained powder mixtures are consolidated by spark plasma sintering. The developed novel technological route uses electromagnetic field assistance at both powder synthesis and consolidation stages.

AB - Fe, Ti powders, and their mixtures were subjected to electric discharges in a hydrocarbon liquid. During this treatment, the powder particles' refinement and carbide phase formation occurred. The obtained powder mixtures were consolidated by spark plasma sintering at 900°C for 5min under uniaxial pressure of 50-60MPa. The densification behavior, microstructure, phase composition, and mechanical properties of the processed powder samples were investigated. The obtained results indicate the final structure sensitivity to the powder chemical composition and to the regimes of the powder synthesis by the electric discharges. The developed fabrication approach represents a novel technological route for metal-ceramic powder composites' fabrication where the electromagnetic field assistance is employed at both powder synthesis and powder consolidation stages. Fe, Ti powders, and their mixtures are subjected to electric discharges in a hydrocarbon liquid. The obtained powder mixtures are consolidated by spark plasma sintering. The developed novel technological route uses electromagnetic field assistance at both powder synthesis and consolidation stages.

UR - http://www.scopus.com/inward/record.url?scp=84902536404&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84902536404&partnerID=8YFLogxK

U2 - 10.1002/adem.201400105

DO - 10.1002/adem.201400105

M3 - Article

AN - SCOPUS:84902536404

VL - 16

SP - 785

EP - 791

JO - Advanced Engineering Materials

JF - Advanced Engineering Materials

SN - 1438-1656

IS - 6

ER -