Failure mechanisms of titanium VT1−0 and zirconium alloy E110 in ultrafine-grained, fine-grained and coarse-grained states under cyclic loading in gigacycle regime

O. B. Naimark, Yu P. Sharkeev, A. M. Mairambekova, M. V. Bannikov, A. Yu Eroshenko, A. I. Vedernikova

Research output: Contribution to journalArticle

Abstract

Fatigue tests were carried out on samples of titanium VT1−0 and zirconium alloy Zr−1 wt % Nb in the ultrafine-grained, fine-grained and coarse-grained states in a gigacycle fatigue regime. It was found that the formation of an ultrafine-grained structure led to an increase in the fatigue limit in the gigacyclic region (109 cycles) by 1.3 times for titanium and 1.7 times for zirconium alloy when compared to the fine-grained and coarse-grained states. An evolution of the temperature field for titanium and zirconium alloy samples in various structural states in the process of cyclic loading was studied by the method of infrared thermography. It was shown that the process of cyclic deformation in all types of structural states was accompanied by an initiation and expansion of a heat source in a local volume of samples which has a significant impact on the fatigue strength. The increment of the maximum temperature on the surface of ultrafine-grained samples of titanium VT1−0 and zirconium alloy Zr−1 wt % Nb is significantly lower than that for the fine-grained and coarse-grained states. This fact indicates a qualitative change in the mechanism of energy dissipation which is associated with characteristic features of the ultrafine-grained state. When comparing the dynamics of thermal fields for the titanium and zirconium alloy samples in coarse-grained, fine-grained and ultrafine-grained states, it was found that the energy dissipation zone covered a considerable volume of the sample in the process of fatigue tests in case of ultrafine-grained state, whereas in case of coarse-grained and fine-grained states the growth of thermal energy was localized in the gauge area of the sample.

Original languageEnglish
Pages (from-to)317-322
Number of pages6
JournalLetters on Materials
Volume8
Issue number3
DOIs
Publication statusPublished - 1 Aug 2018

Fingerprint

Zirconium alloys
Titanium alloys
Fatigue of materials
Energy dissipation
Thermal energy
Gages
Titanium
Temperature distribution
Ultrafine

Keywords

  • Gigacycle fatigue
  • Infrared thermograph
  • Titanium
  • Ultrafine-grained structure
  • Zirconium alloy

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Failure mechanisms of titanium VT1−0 and zirconium alloy E110 in ultrafine-grained, fine-grained and coarse-grained states under cyclic loading in gigacycle regime. / Naimark, O. B.; Sharkeev, Yu P.; Mairambekova, A. M.; Bannikov, M. V.; Eroshenko, A. Yu; Vedernikova, A. I.

In: Letters on Materials, Vol. 8, No. 3, 01.08.2018, p. 317-322.

Research output: Contribution to journalArticle

Naimark, O. B. ; Sharkeev, Yu P. ; Mairambekova, A. M. ; Bannikov, M. V. ; Eroshenko, A. Yu ; Vedernikova, A. I. / Failure mechanisms of titanium VT1−0 and zirconium alloy E110 in ultrafine-grained, fine-grained and coarse-grained states under cyclic loading in gigacycle regime. In: Letters on Materials. 2018 ; Vol. 8, No. 3. pp. 317-322.
@article{fdb63e2476f54022a3a00f2b49eee034,
title = "Failure mechanisms of titanium VT1−0 and zirconium alloy E110 in ultrafine-grained, fine-grained and coarse-grained states under cyclic loading in gigacycle regime",
abstract = "Fatigue tests were carried out on samples of titanium VT1−0 and zirconium alloy Zr−1 wt {\%} Nb in the ultrafine-grained, fine-grained and coarse-grained states in a gigacycle fatigue regime. It was found that the formation of an ultrafine-grained structure led to an increase in the fatigue limit in the gigacyclic region (109 cycles) by 1.3 times for titanium and 1.7 times for zirconium alloy when compared to the fine-grained and coarse-grained states. An evolution of the temperature field for titanium and zirconium alloy samples in various structural states in the process of cyclic loading was studied by the method of infrared thermography. It was shown that the process of cyclic deformation in all types of structural states was accompanied by an initiation and expansion of a heat source in a local volume of samples which has a significant impact on the fatigue strength. The increment of the maximum temperature on the surface of ultrafine-grained samples of titanium VT1−0 and zirconium alloy Zr−1 wt {\%} Nb is significantly lower than that for the fine-grained and coarse-grained states. This fact indicates a qualitative change in the mechanism of energy dissipation which is associated with characteristic features of the ultrafine-grained state. When comparing the dynamics of thermal fields for the titanium and zirconium alloy samples in coarse-grained, fine-grained and ultrafine-grained states, it was found that the energy dissipation zone covered a considerable volume of the sample in the process of fatigue tests in case of ultrafine-grained state, whereas in case of coarse-grained and fine-grained states the growth of thermal energy was localized in the gauge area of the sample.",
keywords = "Gigacycle fatigue, Infrared thermograph, Titanium, Ultrafine-grained structure, Zirconium alloy",
author = "Naimark, {O. B.} and Sharkeev, {Yu P.} and Mairambekova, {A. M.} and Bannikov, {M. V.} and Eroshenko, {A. Yu} and Vedernikova, {A. I.}",
year = "2018",
month = "8",
day = "1",
doi = "10.22226/2410-3535-2018-3-317-322",
language = "English",
volume = "8",
pages = "317--322",
journal = "Letters on Materials",
issn = "2218-5046",
publisher = "Institute for Metals Superplasticity Problems of Russian Academy of Sciences",
number = "3",

}

TY - JOUR

T1 - Failure mechanisms of titanium VT1−0 and zirconium alloy E110 in ultrafine-grained, fine-grained and coarse-grained states under cyclic loading in gigacycle regime

AU - Naimark, O. B.

AU - Sharkeev, Yu P.

AU - Mairambekova, A. M.

AU - Bannikov, M. V.

AU - Eroshenko, A. Yu

AU - Vedernikova, A. I.

PY - 2018/8/1

Y1 - 2018/8/1

N2 - Fatigue tests were carried out on samples of titanium VT1−0 and zirconium alloy Zr−1 wt % Nb in the ultrafine-grained, fine-grained and coarse-grained states in a gigacycle fatigue regime. It was found that the formation of an ultrafine-grained structure led to an increase in the fatigue limit in the gigacyclic region (109 cycles) by 1.3 times for titanium and 1.7 times for zirconium alloy when compared to the fine-grained and coarse-grained states. An evolution of the temperature field for titanium and zirconium alloy samples in various structural states in the process of cyclic loading was studied by the method of infrared thermography. It was shown that the process of cyclic deformation in all types of structural states was accompanied by an initiation and expansion of a heat source in a local volume of samples which has a significant impact on the fatigue strength. The increment of the maximum temperature on the surface of ultrafine-grained samples of titanium VT1−0 and zirconium alloy Zr−1 wt % Nb is significantly lower than that for the fine-grained and coarse-grained states. This fact indicates a qualitative change in the mechanism of energy dissipation which is associated with characteristic features of the ultrafine-grained state. When comparing the dynamics of thermal fields for the titanium and zirconium alloy samples in coarse-grained, fine-grained and ultrafine-grained states, it was found that the energy dissipation zone covered a considerable volume of the sample in the process of fatigue tests in case of ultrafine-grained state, whereas in case of coarse-grained and fine-grained states the growth of thermal energy was localized in the gauge area of the sample.

AB - Fatigue tests were carried out on samples of titanium VT1−0 and zirconium alloy Zr−1 wt % Nb in the ultrafine-grained, fine-grained and coarse-grained states in a gigacycle fatigue regime. It was found that the formation of an ultrafine-grained structure led to an increase in the fatigue limit in the gigacyclic region (109 cycles) by 1.3 times for titanium and 1.7 times for zirconium alloy when compared to the fine-grained and coarse-grained states. An evolution of the temperature field for titanium and zirconium alloy samples in various structural states in the process of cyclic loading was studied by the method of infrared thermography. It was shown that the process of cyclic deformation in all types of structural states was accompanied by an initiation and expansion of a heat source in a local volume of samples which has a significant impact on the fatigue strength. The increment of the maximum temperature on the surface of ultrafine-grained samples of titanium VT1−0 and zirconium alloy Zr−1 wt % Nb is significantly lower than that for the fine-grained and coarse-grained states. This fact indicates a qualitative change in the mechanism of energy dissipation which is associated with characteristic features of the ultrafine-grained state. When comparing the dynamics of thermal fields for the titanium and zirconium alloy samples in coarse-grained, fine-grained and ultrafine-grained states, it was found that the energy dissipation zone covered a considerable volume of the sample in the process of fatigue tests in case of ultrafine-grained state, whereas in case of coarse-grained and fine-grained states the growth of thermal energy was localized in the gauge area of the sample.

KW - Gigacycle fatigue

KW - Infrared thermograph

KW - Titanium

KW - Ultrafine-grained structure

KW - Zirconium alloy

UR - http://www.scopus.com/inward/record.url?scp=85053625900&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053625900&partnerID=8YFLogxK

U2 - 10.22226/2410-3535-2018-3-317-322

DO - 10.22226/2410-3535-2018-3-317-322

M3 - Article

VL - 8

SP - 317

EP - 322

JO - Letters on Materials

JF - Letters on Materials

SN - 2218-5046

IS - 3

ER -