Fabrication of the Ni3Al-based alloy formed by spark plasma sintering of VKNA powders

L. I. Shevtsova, Alexander Sergeevich Ivashutenko, N. V. Martyushev, R. I. Kuzmin

Research output: Contribution to journalConference article

2 Citations (Scopus)

Abstract

The material based on Ni3Al intermetallic has been obtained from the industrial powder of a VKNA type by the method of spark plasma sintering. Materials sintering was conducted at the temperature of 1100 °C, compacting pressure of 20 MPa, and during soaking time equal to 5 minutes. The heating rate of samples amounted to 50 and 200 °C/min. It has been established that the material obtained by sintering at the rate of 50 °C/min possesses a maximum value of density (5.93 g/cm3) and a maximum level of bending strength (∼ 400 MPa).

Original languageEnglish
Article number012113
JournalIOP Conference Series: Materials Science and Engineering
Volume124
Issue number1
DOIs
Publication statusPublished - 2 Jun 2016
EventInternational Conference on Mechanical Engineering, Automation and Control Systems 2015, MEACS 2015 - Tomsk, Russian Federation
Duration: 1 Dec 20154 Dec 2015

Fingerprint

Spark plasma sintering
Powders
Fabrication
Sintering
Heating rate
Bending strength
Intermetallics
Temperature

ASJC Scopus subject areas

  • Materials Science(all)
  • Engineering(all)

Cite this

Fabrication of the Ni3Al-based alloy formed by spark plasma sintering of VKNA powders. / Shevtsova, L. I.; Ivashutenko, Alexander Sergeevich; Martyushev, N. V.; Kuzmin, R. I.

In: IOP Conference Series: Materials Science and Engineering, Vol. 124, No. 1, 012113, 02.06.2016.

Research output: Contribution to journalConference article

@article{2cfbe4cff7be4ba08ba27c6096ea415f,
title = "Fabrication of the Ni3Al-based alloy formed by spark plasma sintering of VKNA powders",
abstract = "The material based on Ni3Al intermetallic has been obtained from the industrial powder of a VKNA type by the method of spark plasma sintering. Materials sintering was conducted at the temperature of 1100 °C, compacting pressure of 20 MPa, and during soaking time equal to 5 minutes. The heating rate of samples amounted to 50 and 200 °C/min. It has been established that the material obtained by sintering at the rate of 50 °C/min possesses a maximum value of density (5.93 g/cm3) and a maximum level of bending strength (∼ 400 MPa).",
author = "Shevtsova, {L. I.} and Ivashutenko, {Alexander Sergeevich} and Martyushev, {N. V.} and Kuzmin, {R. I.}",
year = "2016",
month = "6",
day = "2",
doi = "10.1088/1757-899X/124/1/012113",
language = "English",
volume = "124",
journal = "IOP Conference Series: Materials Science and Engineering",
issn = "1757-8981",
publisher = "IOP Publishing Ltd.",
number = "1",

}

TY - JOUR

T1 - Fabrication of the Ni3Al-based alloy formed by spark plasma sintering of VKNA powders

AU - Shevtsova, L. I.

AU - Ivashutenko, Alexander Sergeevich

AU - Martyushev, N. V.

AU - Kuzmin, R. I.

PY - 2016/6/2

Y1 - 2016/6/2

N2 - The material based on Ni3Al intermetallic has been obtained from the industrial powder of a VKNA type by the method of spark plasma sintering. Materials sintering was conducted at the temperature of 1100 °C, compacting pressure of 20 MPa, and during soaking time equal to 5 minutes. The heating rate of samples amounted to 50 and 200 °C/min. It has been established that the material obtained by sintering at the rate of 50 °C/min possesses a maximum value of density (5.93 g/cm3) and a maximum level of bending strength (∼ 400 MPa).

AB - The material based on Ni3Al intermetallic has been obtained from the industrial powder of a VKNA type by the method of spark plasma sintering. Materials sintering was conducted at the temperature of 1100 °C, compacting pressure of 20 MPa, and during soaking time equal to 5 minutes. The heating rate of samples amounted to 50 and 200 °C/min. It has been established that the material obtained by sintering at the rate of 50 °C/min possesses a maximum value of density (5.93 g/cm3) and a maximum level of bending strength (∼ 400 MPa).

UR - http://www.scopus.com/inward/record.url?scp=84975746106&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84975746106&partnerID=8YFLogxK

U2 - 10.1088/1757-899X/124/1/012113

DO - 10.1088/1757-899X/124/1/012113

M3 - Conference article

VL - 124

JO - IOP Conference Series: Materials Science and Engineering

JF - IOP Conference Series: Materials Science and Engineering

SN - 1757-8981

IS - 1

M1 - 012113

ER -