Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene

S. V. Panin, L. A. Kornienko, V. O. Alexenko, D. G. Buslovich, Yu V. Dontsov

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Mechanical and tribotechnical characteristics of polymer-polymeric composites of UHMWPE are studied with the aim of developing extrudable, wear-resistant, self-lubricant polymer mixtures for Additive Manufacturing (AM). The motivation of the study is their further application as feedstocks for 3D printing. Blends of UHMWPE with graft- and block copolymers of low-density polyethylene (HDPE-g-VTMS, HDPE-g-SMA, HDPE-b-EVA), polypropylene (PP), block copolymers of polypropylene and polyamide with linear low density polyethylene (PP-b-LLDPE, PA-b-LLDPE), as well as cross-linked polyethylene (PEX-b), are examined. The choice of compatible polymer components for an ultra- high molecular weight matrix for increasing processability (extrudability) is motivated by the search for commercially available and efficient additives aimed at developing wear-resistant extrudable polymer composites for additive manufacturing. The extrudability, mechanical properties and wear resistance of UHMWPE-based polymer-polymeric composites under sliding friction with different velocities and loads are studied.

Original languageEnglish
Title of host publicationMechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017
Subtitle of host publicationProceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures
PublisherAmerican Institute of Physics Inc.
Volume1915
ISBN (Electronic)9780735416079
DOIs
Publication statusPublished - 12 Dec 2017
Event11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017 - Ekaterinburg, Russian Federation
Duration: 11 Dec 201715 Dec 2017

Conference

Conference11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017
CountryRussian Federation
CityEkaterinburg
Period11.12.1715.12.17

Fingerprint

polyethylenes
molecular weight
composite materials
polypropylene
polymers
block copolymers
manufacturing
extravehicular activity
sliding friction
spectral mixture analysis
lubricants
wear resistance
printing
mechanical properties
matrices

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Panin, S. V., Kornienko, L. A., Alexenko, V. O., Buslovich, D. G., & Dontsov, Y. V. (2017). Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene. In Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures (Vol. 1915). [020005] American Institute of Physics Inc.. https://doi.org/10.1063/1.5017317

Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene. / Panin, S. V.; Kornienko, L. A.; Alexenko, V. O.; Buslovich, D. G.; Dontsov, Yu V.

Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915 American Institute of Physics Inc., 2017. 020005.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Panin, SV, Kornienko, LA, Alexenko, VO, Buslovich, DG & Dontsov, YV 2017, Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene. in Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. vol. 1915, 020005, American Institute of Physics Inc., 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017, Ekaterinburg, Russian Federation, 11.12.17. https://doi.org/10.1063/1.5017317
Panin SV, Kornienko LA, Alexenko VO, Buslovich DG, Dontsov YV. Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene. In Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915. American Institute of Physics Inc. 2017. 020005 https://doi.org/10.1063/1.5017317
Panin, S. V. ; Kornienko, L. A. ; Alexenko, V. O. ; Buslovich, D. G. ; Dontsov, Yu V. / Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene. Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Vol. 1915 American Institute of Physics Inc., 2017.
@inproceedings{eb7b852484c44d589fc1514cd2c32777,
title = "Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene",
abstract = "Mechanical and tribotechnical characteristics of polymer-polymeric composites of UHMWPE are studied with the aim of developing extrudable, wear-resistant, self-lubricant polymer mixtures for Additive Manufacturing (AM). The motivation of the study is their further application as feedstocks for 3D printing. Blends of UHMWPE with graft- and block copolymers of low-density polyethylene (HDPE-g-VTMS, HDPE-g-SMA, HDPE-b-EVA), polypropylene (PP), block copolymers of polypropylene and polyamide with linear low density polyethylene (PP-b-LLDPE, PA-b-LLDPE), as well as cross-linked polyethylene (PEX-b), are examined. The choice of compatible polymer components for an ultra- high molecular weight matrix for increasing processability (extrudability) is motivated by the search for commercially available and efficient additives aimed at developing wear-resistant extrudable polymer composites for additive manufacturing. The extrudability, mechanical properties and wear resistance of UHMWPE-based polymer-polymeric composites under sliding friction with different velocities and loads are studied.",
author = "Panin, {S. V.} and Kornienko, {L. A.} and Alexenko, {V. O.} and Buslovich, {D. G.} and Dontsov, {Yu V.}",
year = "2017",
month = "12",
day = "12",
doi = "10.1063/1.5017317",
language = "English",
volume = "1915",
booktitle = "Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017",
publisher = "American Institute of Physics Inc.",

}

TY - GEN

T1 - Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene

AU - Panin, S. V.

AU - Kornienko, L. A.

AU - Alexenko, V. O.

AU - Buslovich, D. G.

AU - Dontsov, Yu V.

PY - 2017/12/12

Y1 - 2017/12/12

N2 - Mechanical and tribotechnical characteristics of polymer-polymeric composites of UHMWPE are studied with the aim of developing extrudable, wear-resistant, self-lubricant polymer mixtures for Additive Manufacturing (AM). The motivation of the study is their further application as feedstocks for 3D printing. Blends of UHMWPE with graft- and block copolymers of low-density polyethylene (HDPE-g-VTMS, HDPE-g-SMA, HDPE-b-EVA), polypropylene (PP), block copolymers of polypropylene and polyamide with linear low density polyethylene (PP-b-LLDPE, PA-b-LLDPE), as well as cross-linked polyethylene (PEX-b), are examined. The choice of compatible polymer components for an ultra- high molecular weight matrix for increasing processability (extrudability) is motivated by the search for commercially available and efficient additives aimed at developing wear-resistant extrudable polymer composites for additive manufacturing. The extrudability, mechanical properties and wear resistance of UHMWPE-based polymer-polymeric composites under sliding friction with different velocities and loads are studied.

AB - Mechanical and tribotechnical characteristics of polymer-polymeric composites of UHMWPE are studied with the aim of developing extrudable, wear-resistant, self-lubricant polymer mixtures for Additive Manufacturing (AM). The motivation of the study is their further application as feedstocks for 3D printing. Blends of UHMWPE with graft- and block copolymers of low-density polyethylene (HDPE-g-VTMS, HDPE-g-SMA, HDPE-b-EVA), polypropylene (PP), block copolymers of polypropylene and polyamide with linear low density polyethylene (PP-b-LLDPE, PA-b-LLDPE), as well as cross-linked polyethylene (PEX-b), are examined. The choice of compatible polymer components for an ultra- high molecular weight matrix for increasing processability (extrudability) is motivated by the search for commercially available and efficient additives aimed at developing wear-resistant extrudable polymer composites for additive manufacturing. The extrudability, mechanical properties and wear resistance of UHMWPE-based polymer-polymeric composites under sliding friction with different velocities and loads are studied.

UR - http://www.scopus.com/inward/record.url?scp=85038896900&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85038896900&partnerID=8YFLogxK

U2 - 10.1063/1.5017317

DO - 10.1063/1.5017317

M3 - Conference contribution

AN - SCOPUS:85038896900

VL - 1915

BT - Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017

PB - American Institute of Physics Inc.

ER -