Experimental Study of the Conditions for Quenching Forest Combustible Materials

Research output: Contribution to journalArticle

Abstract

To confirm the possibility of quenching forest combustible materials by small volumes of water, experimental studies have been made of the processes of interaction of droplets, films, and aerosol flows of water with small sources of combustion of typical forest combustible materials — birch leaves, pine needles, birch and asp twigs. Model combustion sources in the form of cylinders of diameter 20–60 mm and height 40–100 mm were constructed. With the use of high-speed video recording, the characteristic times of thermal decomposition of forest combustibles and the times of suppressing combustion of these materials under various conditions of their interaction with water (pulsed supply of aerosol, injection of water ″mist″ with droplets of radius up to 100 μm, sequential supply of large drops of radius about 1.5 mm) have been determined. Volumes of water sufficient for suppressing combustion depending on the method of supplying it onto the surface of the reacting forest combustible have been determined. Estimates have been made of the nonreacted portion of the material by comparing the initial mass of the sample of the forest combustible with its final mass (upon quenching the material).

Original languageEnglish
Pages (from-to)1-10
Number of pages10
JournalJournal of Engineering Physics and Thermophysics
DOIs
Publication statusAccepted/In press - 17 Jun 2017

Fingerprint

Quenching
quenching
water
Aerosols
Water
aerosols
mist
Video recording
radii
Flow of water
supplying
Fog
needles
Needles
leaves
thermal decomposition
Pyrolysis
recording
high speed
interactions

Keywords

  • droplet
  • forest combustible material
  • leaves
  • needles
  • quenching
  • thermal decomposition
  • twigs
  • water film
  • water ″mist,″ aerosol

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Engineering(all)

Cite this

@article{b1da002bdff1459c8e6cfe2138da59d1,
title = "Experimental Study of the Conditions for Quenching Forest Combustible Materials",
abstract = "To confirm the possibility of quenching forest combustible materials by small volumes of water, experimental studies have been made of the processes of interaction of droplets, films, and aerosol flows of water with small sources of combustion of typical forest combustible materials — birch leaves, pine needles, birch and asp twigs. Model combustion sources in the form of cylinders of diameter 20–60 mm and height 40–100 mm were constructed. With the use of high-speed video recording, the characteristic times of thermal decomposition of forest combustibles and the times of suppressing combustion of these materials under various conditions of their interaction with water (pulsed supply of aerosol, injection of water ″mist″ with droplets of radius up to 100 μm, sequential supply of large drops of radius about 1.5 mm) have been determined. Volumes of water sufficient for suppressing combustion depending on the method of supplying it onto the surface of the reacting forest combustible have been determined. Estimates have been made of the nonreacted portion of the material by comparing the initial mass of the sample of the forest combustible with its final mass (upon quenching the material).",
keywords = "droplet, forest combustible material, leaves, needles, quenching, thermal decomposition, twigs, water film, water ″mist,″ aerosol",
author = "Antonov, {D. V.} and Volkov, {R. S.} and Zhdanova, {A. O.} and Kuznetsov, {G. V.} and Strizhak, {P. A.}",
year = "2017",
month = "6",
day = "17",
doi = "10.1007/s10891-017-1594-x",
language = "English",
pages = "1--10",
journal = "Journal of Engineering Physics and Thermophysics",
issn = "1062-0125",
publisher = "Springer GmbH & Co, Auslieferungs-Gesellschaf",

}

TY - JOUR

T1 - Experimental Study of the Conditions for Quenching Forest Combustible Materials

AU - Antonov, D. V.

AU - Volkov, R. S.

AU - Zhdanova, A. O.

AU - Kuznetsov, G. V.

AU - Strizhak, P. A.

PY - 2017/6/17

Y1 - 2017/6/17

N2 - To confirm the possibility of quenching forest combustible materials by small volumes of water, experimental studies have been made of the processes of interaction of droplets, films, and aerosol flows of water with small sources of combustion of typical forest combustible materials — birch leaves, pine needles, birch and asp twigs. Model combustion sources in the form of cylinders of diameter 20–60 mm and height 40–100 mm were constructed. With the use of high-speed video recording, the characteristic times of thermal decomposition of forest combustibles and the times of suppressing combustion of these materials under various conditions of their interaction with water (pulsed supply of aerosol, injection of water ″mist″ with droplets of radius up to 100 μm, sequential supply of large drops of radius about 1.5 mm) have been determined. Volumes of water sufficient for suppressing combustion depending on the method of supplying it onto the surface of the reacting forest combustible have been determined. Estimates have been made of the nonreacted portion of the material by comparing the initial mass of the sample of the forest combustible with its final mass (upon quenching the material).

AB - To confirm the possibility of quenching forest combustible materials by small volumes of water, experimental studies have been made of the processes of interaction of droplets, films, and aerosol flows of water with small sources of combustion of typical forest combustible materials — birch leaves, pine needles, birch and asp twigs. Model combustion sources in the form of cylinders of diameter 20–60 mm and height 40–100 mm were constructed. With the use of high-speed video recording, the characteristic times of thermal decomposition of forest combustibles and the times of suppressing combustion of these materials under various conditions of their interaction with water (pulsed supply of aerosol, injection of water ″mist″ with droplets of radius up to 100 μm, sequential supply of large drops of radius about 1.5 mm) have been determined. Volumes of water sufficient for suppressing combustion depending on the method of supplying it onto the surface of the reacting forest combustible have been determined. Estimates have been made of the nonreacted portion of the material by comparing the initial mass of the sample of the forest combustible with its final mass (upon quenching the material).

KW - droplet

KW - forest combustible material

KW - leaves

KW - needles

KW - quenching

KW - thermal decomposition

KW - twigs

KW - water film

KW - water ″mist,″ aerosol

UR - http://www.scopus.com/inward/record.url?scp=85020521712&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020521712&partnerID=8YFLogxK

U2 - 10.1007/s10891-017-1594-x

DO - 10.1007/s10891-017-1594-x

M3 - Article

AN - SCOPUS:85020521712

SP - 1

EP - 10

JO - Journal of Engineering Physics and Thermophysics

JF - Journal of Engineering Physics and Thermophysics

SN - 1062-0125

ER -