Experimental Study of Laser Treatment of Ti3AlC2 Max Phase

Maksim Krinitcyn, Olga Kashnikova, Maria Ragulina, Anton Baranovskiy, Irina Firsina, Ivan Nikolaev

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Bulk samples from the Ti3AlC2 MAX-phase powder were obtained by selective laser sintering (SLS). The samples were studied using optical and electron microscopy techniques, as well as X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) spectroscopy analysis. This study allowed describing the elemental and phase composition, and the morphology of both the initial powders and SLS-samples. The SLS parameters are established at which the maximum yield of the MAX phase in the SLS-samples is observed.

Original languageEnglish
Title of host publicationProceedings - 2020 7th International Congress on Energy Fluxes and Radiation Effects, EFRE 2020
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1150-1154
Number of pages5
ISBN (Electronic)9781728126869
DOIs
Publication statusPublished - 14 Sep 2020
Event7th International Congress on Energy Fluxes and Radiation Effects, EFRE 2020 - Virtual, Tomsk, Russian Federation
Duration: 14 Sep 202026 Sep 2020

Publication series

NameProceedings - 2020 7th International Congress on Energy Fluxes and Radiation Effects, EFRE 2020

Conference

Conference7th International Congress on Energy Fluxes and Radiation Effects, EFRE 2020
CountryRussian Federation
CityVirtual, Tomsk
Period14.9.2026.9.20

Keywords

  • MAX phases
  • Selective laser sintering
  • Titanium carboaluminide

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Energy Engineering and Power Technology

Fingerprint Dive into the research topics of 'Experimental Study of Laser Treatment of Ti3AlC2 Max Phase'. Together they form a unique fingerprint.

Cite this