Experimental study and analytical reconstruction of precessing vortex in a tangential swirler

Ivan V. Litvinov, Sergey I. Shtork, Pavel A. Kuibin, Sergey V. Alekseenko, Kemal Hanjalic

Research output: Contribution to journalArticle

40 Citations (Scopus)

Abstract

We report on experimental and analytical studies of strongly swirling air flow in the near-field of a generic axisymmetric tangential swirler used often as swirl generator in combustors, phase separators or mixing devices. The focus was on the characterization of the precessing vortex core (PVC) for a range of swirl numbers S=. 1.4-2.4 and Reynolds numbers of 14,460-38,300. The velocity field and the spectra measured with a Laser-Doppler anemometer confirmed in all cases the occurrence of PVC and the central recirculation zone (CRZ) that for higher swirl numbers penetrates back into the swirler chamber. The instantaneous pressure, its frequency characteristics and the phase-average values have been measured with a sensitive microphone equipped with a special probe tip. We show then that the PVC frequency, helix diameter and the core displacement computed from the analytical model of a confined helical vortex (. Alekseenko et al., 1999, 2007) using only the time-averaged velocity field agree well with the measurements, whereas the analytically reconstructed phase-averaged velocity and pressure distributions show good qualitative agreement with the measured pressure fields. The exception is the discrepancy in the pressure amplitude, which for the highest S=. 2.4 reaches almost 50%. Despite the latter imperfection, it has been confirmed that the analytical model can be used to identify the existence of a PVC and to compute its structure parameters solely from the measured (or otherwise available) time-mean axial and tangential velocities.

Original languageEnglish
Pages (from-to)251-264
Number of pages14
JournalInternational Journal of Heat and Fluid Flow
Volume42
DOIs
Publication statusPublished - 1 Aug 2013
Externally publishedYes

Fingerprint

Vortex flow
vortices
velocity distribution
pressure distribution
Analytical models
anemometers
swirling
Phase velocity
Anemometers
air flow
Microphones
separators
combustion chambers
Combustors
Velocity distribution
Separators
microphones
phase velocity
Pressure distribution
helices

Keywords

  • Analytical reconstruction of PVC
  • Central recirculation zone (CRZ)
  • Precessing vortex core (PVC)
  • Pressure pulsations
  • Tangential swirler

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Experimental study and analytical reconstruction of precessing vortex in a tangential swirler. / Litvinov, Ivan V.; Shtork, Sergey I.; Kuibin, Pavel A.; Alekseenko, Sergey V.; Hanjalic, Kemal.

In: International Journal of Heat and Fluid Flow, Vol. 42, 01.08.2013, p. 251-264.

Research output: Contribution to journalArticle

Litvinov, Ivan V. ; Shtork, Sergey I. ; Kuibin, Pavel A. ; Alekseenko, Sergey V. ; Hanjalic, Kemal. / Experimental study and analytical reconstruction of precessing vortex in a tangential swirler. In: International Journal of Heat and Fluid Flow. 2013 ; Vol. 42. pp. 251-264.
@article{7fc7e75c42334029b00221eb84938864,
title = "Experimental study and analytical reconstruction of precessing vortex in a tangential swirler",
abstract = "We report on experimental and analytical studies of strongly swirling air flow in the near-field of a generic axisymmetric tangential swirler used often as swirl generator in combustors, phase separators or mixing devices. The focus was on the characterization of the precessing vortex core (PVC) for a range of swirl numbers S=. 1.4-2.4 and Reynolds numbers of 14,460-38,300. The velocity field and the spectra measured with a Laser-Doppler anemometer confirmed in all cases the occurrence of PVC and the central recirculation zone (CRZ) that for higher swirl numbers penetrates back into the swirler chamber. The instantaneous pressure, its frequency characteristics and the phase-average values have been measured with a sensitive microphone equipped with a special probe tip. We show then that the PVC frequency, helix diameter and the core displacement computed from the analytical model of a confined helical vortex (. Alekseenko et al., 1999, 2007) using only the time-averaged velocity field agree well with the measurements, whereas the analytically reconstructed phase-averaged velocity and pressure distributions show good qualitative agreement with the measured pressure fields. The exception is the discrepancy in the pressure amplitude, which for the highest S=. 2.4 reaches almost 50{\%}. Despite the latter imperfection, it has been confirmed that the analytical model can be used to identify the existence of a PVC and to compute its structure parameters solely from the measured (or otherwise available) time-mean axial and tangential velocities.",
keywords = "Analytical reconstruction of PVC, Central recirculation zone (CRZ), Precessing vortex core (PVC), Pressure pulsations, Tangential swirler",
author = "Litvinov, {Ivan V.} and Shtork, {Sergey I.} and Kuibin, {Pavel A.} and Alekseenko, {Sergey V.} and Kemal Hanjalic",
year = "2013",
month = "8",
day = "1",
doi = "10.1016/j.ijheatfluidflow.2013.02.009",
language = "English",
volume = "42",
pages = "251--264",
journal = "International Journal of Heat and Fluid Flow",
issn = "0142-727X",
publisher = "Elsevier",

}

TY - JOUR

T1 - Experimental study and analytical reconstruction of precessing vortex in a tangential swirler

AU - Litvinov, Ivan V.

AU - Shtork, Sergey I.

AU - Kuibin, Pavel A.

AU - Alekseenko, Sergey V.

AU - Hanjalic, Kemal

PY - 2013/8/1

Y1 - 2013/8/1

N2 - We report on experimental and analytical studies of strongly swirling air flow in the near-field of a generic axisymmetric tangential swirler used often as swirl generator in combustors, phase separators or mixing devices. The focus was on the characterization of the precessing vortex core (PVC) for a range of swirl numbers S=. 1.4-2.4 and Reynolds numbers of 14,460-38,300. The velocity field and the spectra measured with a Laser-Doppler anemometer confirmed in all cases the occurrence of PVC and the central recirculation zone (CRZ) that for higher swirl numbers penetrates back into the swirler chamber. The instantaneous pressure, its frequency characteristics and the phase-average values have been measured with a sensitive microphone equipped with a special probe tip. We show then that the PVC frequency, helix diameter and the core displacement computed from the analytical model of a confined helical vortex (. Alekseenko et al., 1999, 2007) using only the time-averaged velocity field agree well with the measurements, whereas the analytically reconstructed phase-averaged velocity and pressure distributions show good qualitative agreement with the measured pressure fields. The exception is the discrepancy in the pressure amplitude, which for the highest S=. 2.4 reaches almost 50%. Despite the latter imperfection, it has been confirmed that the analytical model can be used to identify the existence of a PVC and to compute its structure parameters solely from the measured (or otherwise available) time-mean axial and tangential velocities.

AB - We report on experimental and analytical studies of strongly swirling air flow in the near-field of a generic axisymmetric tangential swirler used often as swirl generator in combustors, phase separators or mixing devices. The focus was on the characterization of the precessing vortex core (PVC) for a range of swirl numbers S=. 1.4-2.4 and Reynolds numbers of 14,460-38,300. The velocity field and the spectra measured with a Laser-Doppler anemometer confirmed in all cases the occurrence of PVC and the central recirculation zone (CRZ) that for higher swirl numbers penetrates back into the swirler chamber. The instantaneous pressure, its frequency characteristics and the phase-average values have been measured with a sensitive microphone equipped with a special probe tip. We show then that the PVC frequency, helix diameter and the core displacement computed from the analytical model of a confined helical vortex (. Alekseenko et al., 1999, 2007) using only the time-averaged velocity field agree well with the measurements, whereas the analytically reconstructed phase-averaged velocity and pressure distributions show good qualitative agreement with the measured pressure fields. The exception is the discrepancy in the pressure amplitude, which for the highest S=. 2.4 reaches almost 50%. Despite the latter imperfection, it has been confirmed that the analytical model can be used to identify the existence of a PVC and to compute its structure parameters solely from the measured (or otherwise available) time-mean axial and tangential velocities.

KW - Analytical reconstruction of PVC

KW - Central recirculation zone (CRZ)

KW - Precessing vortex core (PVC)

KW - Pressure pulsations

KW - Tangential swirler

UR - http://www.scopus.com/inward/record.url?scp=84879187181&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84879187181&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatfluidflow.2013.02.009

DO - 10.1016/j.ijheatfluidflow.2013.02.009

M3 - Article

VL - 42

SP - 251

EP - 264

JO - International Journal of Heat and Fluid Flow

JF - International Journal of Heat and Fluid Flow

SN - 0142-727X

ER -